Fit Shiv V3 ForksWrite a review
The main goal with the Shiv V3 Fork for Fit Bike co was to design and produce an extremely strong fork with plenty of tire clearance. After 2 years of R&D and a lot of investment in tooling, the Shiv V3 is available with a quick 25mm offset. Here are a fe ... Read More
The main goal with the Shiv V3 Fork for Fit Bike co was to design and produce an extremely strong fork with plenty of tire clearance. After 2 years of RandD and a lot of investment in tooling, the Shiv V3 is available with a quick 25mm offset. Here are a few features that make these forks so strong. Using left and right specific investment cast drop-outs instead of traditional Cr-Mo plate, Fit have eliminated the weld gap on the inside of the drops, and were able to thicken up the drops toward the top making a much stronger drop-out/leg connection. Seamless, swaged legs provide more strength than welded or fused caps-especially if pegs are installed. The ends of these legs are formed, not capped and welded so there is nothing to fracture. A longer 166mm CNC'd steerer tube with increased wall thicknesses wherever possible and a 24mm x 1.5 compression cap with integrated race. Tapered and butted legs provide tons of strength, crown weld surface, and peg clearance./li> Post weld 4Q Baked heat-treatment
- Steerer Tube
- Steerer Tube Length
- Axle to Crown
- Heat Treat
- Seamless Swaged (No Welded Cap)
- Investment Cast
- 1 Piece CNC-Machined 4130 CrMo
- M24 X 1.5 Thread – 6mm Allen Slot
- 2.25 lb (1.02 kg)
- 4Q Baked Post-Weld
|Brand||Fit Bike Co|
Be The First To Review This Product!
Help other LUXBMX Store users shop smarter by writing reviews for products you have purchased.