Buying the Wethepeople Crysis Bike (2020) won't cause a crysis, in fact far from it, wait until you see this thing, 'solid' is an understatement! These bikes are damn close to PRO spec with a full Chromoly frame, bars and forks strength was the biggest
... Read More
Notify Me
We also recommend:
More infoMake 4 payments of $300.00 over 8 weeks and get it now!
Free Delivery on orders over $99*
*Within Australia only. Excludes bikes and bulky items to non-metro locations. Enter your postcode to check.
Calculate Delivery Time and Cost
Calculate Shipping
Buying the Wethepeople Crysis Bike (2020) won't cause a crysis, in fact far from it, wait until you see this thing, 'solid' is an understatement! These bikes are damn close to PRO spec with a full Chromoly frame, bars and forks strength was the biggest factor in building up this bike. Eclat Filter grips are stylish and comfortable whilst still giving you the maximum amount of grip. Barspins and crankflips won't be an issue with Salt providing the BB and Headset bearings, plus front and rear sealed hubs! The Eclat Talon calipers hooked up to a Salt Moto Lever creates a braking system like no other! An aftermarket Wethepeople Logic stem was added to the bike in a 50mm reach for the best of both worlds and the Eclat Slash pedals are light and sticky!
This bike is available in two top tube lengths- either 21" for the taller riders and 20.5" for the slightly shorter.
(WTP20-CRYSIS)
FRAME - 4130 full crmo, tapered SS & CS removable pivots & guides, 127mm head tube
FORK - SALTPLUS "CRYSIS" fork, 4130 full crmo, 4130 crmo steerer, 26mm offset
BARS - SALTPLUS "CRYSIS" 2pc bar, 4130 full crmo
GRIPS - ÉCLAT "FILTER" flangeless grips
STEM - WETHEPEOPLE "LOGIC" top load stem, 50mm reach, full cnc
HEADSET - SALT "PRO" int. headset, sealed bearing
GYRO - holes for removable gyro tabs
LEVER - SALT "MOTO" alloy brake lever
BRAKES - ÉCLAT "TALON" alloy u-brake rear
CRANKS - SALTPLUS "ULTRA" square profile 3pc "TSS" crank crmo 170mm, 8 spline
BB - SALT "MID" 19mm, press fit, sealed bearing
PEDALS - ÉCLAT "SLASH" nylon/fiberglass pedals
CHAIN - WETHEPEOPLE "SUPPLY" chain, Z510HX type
SPROCKET - WETHEPEOPLE "LOGIC" 6061-T6 alloy, cnc sprocket, 25t
DRIVER - 9t, 1pc cassette driver, sealed bearing
FRONT HUB - SALTPLUS "PRO" hub, fully sealed, 3/8"s female bolts, 36h
REAR HUB - SALTPLUS "PRO" cassette hub, fully sealed, 9t, 14mm axle, 36h
HUB GUARDS - SALTPLUS "PRO" nylon/fiberglass front (x2) & rear (x2) hub guards
FRONT RIM - SALTPLUS "SUMMIT" double wall rim, 36h
REAR RIM - SALTPLUS "SUMMIT" double wall rim, 36h
SEAT - ÉCLAT "BIOS" mid padded pivotal seat
SEAT POST - SALT "AM" pivotal seat post, alloy
SEAT CLAMP - WETHEPEOPLE "LOGIC" seat clamp, 4130 crmo
TIRES - WETHEPEOPLE "OVERBITE" tires 2.35" front & rear
TOP TUBE LENGTH - 20.5" | 21"
TOP TUBE LENGTH - 20.5" | 21"
CHAIN STAY LENGTH - 13.2"
HEAD TUBE ANGLE - 75°
SEAT TUBE ANGLE - 71°
BOTTOM BRACKET HEIGHT - 11.65"
STAND OVER HEIGHT - 8.75" | 9"
BAR RISE - 9" | 9.25"
BAR RISE - 9" | 9.25"
BAR WIDTH - 29.5" | 29.75"
BAR BACKSWEEP - 12°
BAR UPSWEEP - 2°
| SKU | WTP20-CRYSIS |
| Brand | Wethepeople |
| Shipping Weight | 15.0000kg |
| Shipping Width | 0.010m |
| Shipping Height | 0.010m |
| Shipping Length | 0.010m |
| Shipping Cubic | 0.000001000m3 |
Please Note: Clear, raw and translucent parts, frames and bikes can paints can show surface oxidation. The oxidation will not compromise the structural integrity of the component during its regular lifespan and is not considered to be a defect.
