Highlights

Description

The Answer Front 10mm Pro Hub is the perfect match up to the Pro disc hub from Answer. This version is your traditional 10mm bolt up type.

Matches the Pro disc hub. This is the traditional 10mm bolt up version, built to match up with Answer's Pro disc hub.
14mm hollow alloy axle. A hollow aluminium centre axle with aluminium hardware keeps the whole hub at 182g.
3/8 inch axle bolts. Axle bolts are 3/8 inch by 24 tpi, so it bolts up in the usual race dropout.
36 hole shell. A 36 hole shell with 40mm PCD and 19.5mm from locknut to flange, ready for lacing.
Sealed 15268 bearings. Two 15268 cartridge bearings carry the shell, with the number printed on the seal when you need spares.

Bolt pattern: 40mm PCD
Material: Aluminium axle and hardware
Bearings: 15268 (x2)
Hole count: 36H
Axle: 14mm hollow aluminium centre axle
Axle size: 100mm length
Thread: 3/8" x 24 tpi axle bolts
Weight: 182g
Note: Locknut to flange 19.5. Verify the bearing number on the side of the rubber seal before ordering spares.