Highlights

Braking surface for V-brakes
Standard modulus carbon
30mm wide and deep
36 hole drilling

Description

The Avian Venatic carbon rim is typical of the Avian Brand, high quality and understated design and finish, but with high quality. Exactly our aesthetic here at LUXBMX, which is why we love their range of rims.

Manufactured from highest strength standard modulus fibre, not only are they light and stiff, but at 30mm wide and deep, these rims are low profile. This version of the rim has a braking surface for V-brakes, find them with no braking surface as well if you're running a disc set up.

Features

Braking surface for V-brakes. This version of the Venatic has a braking surface, so it suits a braked build. There is a version without one for disc setups.
Standard modulus carbon. Made from the highest strength standard modulus fibre, so the rim comes out light and stiff.
30mm wide and deep. At 30mm across and 30mm deep, the Venatic keeps a low profile shape.
36 hole drilling. Drilled 36 holes, so it laces to a standard 36 hole hub without hunting for odd spoke counts.
ERD 367mm. Effective rim diameter is 367mm, which is the figure your wheel builder needs to work out spoke length.

Specifications

Wheel size: 20 x 1.75"
Material: Standard modulus carbon fibre
Hole count: 36
Rim width: 30mm
Rim depth: 30mm
Brake surface: Yes, for V-brakes
Weight: 335g +/-10g
Note: ERD 367mm. Also available without a braking surface for disc setups.

Spoke calculator

Display

Pick the part it is laced to and we will give you the lengths to buy.

This rim

Looking up its measurements.

Check or change its figures

ERD effective rim diameter, from the spec sheet mm

Laced to which hub?

Find your hub

Or type its figures

Hub spacing locknut to locknut, 100 front or 110 rear on most BMX mm Same both sides front hubs, or matching flanges

Flange diameter spoke hole centre to the opposite hole centre. The drive side is the driver side, left or right hand drive alike, and is usually the bigger flange

Drive side mm Non-drive side mm

Flange position

Flange to locknut Centre to flange

Drive side mm Non-drive side mm