BSD Back Street Pro Hub Male / Black / LHD / 9T

Highlights

Male 14mm chromoly axle
Skip free 9t driver
Hefty 6903 bearings
Compact shell

Description

The BSD Back Street Pro Hub is designed around their own custom driver with skip free mechanism while still maintaining a compact sized shell. With features such as hefty 6903 bearings and now also coming in male 14mm axle version, you know this hub is built street tough…

Features

Male 14mm chromoly axle. A 4130 heat treated male axle with heat treated 14mm bolts, so it drops into 14mm dropouts ready to go.
Skip free 9t driver. BSD's custom driver runs separate pawls and springs on a polymer bushing, designed not to skip under load.
Hefty 6903 bearings. High quality sealed 6903 bearings carry the load and keep street grit out of the hub.
Compact shell. The 6061 T6 aluminium shell stays compact around the custom driver, with push fit chromoly cones.
RHD or LHD, 464g. Set it up either drive side to suit your bike, at 464g on the scales.

Specifications

Fits: RHD or LHD
Material: 6061 T6 aluminium shell
Bearings: High quality sealed 6903
Driver: Custom 9t with polymer bushing, separate pawls and springs, skip free design
Axle: 14mm male, 4130 heat treated chromoly, push fit chromoly cones
Included: Heat treated 14mm bolts
Weight: 464g

Spoke calculator

Display

Pick the part it is laced to and we will give you the lengths to buy.

This hub

Looking up its measurements.

Check or change its figures

Hub spacing locknut to locknut, 100 front or 110 rear on most BMX mm Same both sides front hubs, or matching flanges

Flange diameter/PCD (pitch circle diameter) spoke hole centre to the opposite hole centre. The drive side is the driver side, left or right hand drive alike, and is usually the bigger flange

Drive side mm Non-drive side mm

Flange position

Flange to locknut Centre to flange

Drive side mm Non-drive side mm

Laced to which rim?

Find your rim

Or type its figures

ERD effective rim diameter, from the spec sheet mm