The BSD Forever Rim features a silver and red finish with "FOREVER" and patterned designs, plus a strong I-beam construction, all shown on a white background.

The BSD Forever Rim stands upright on a grey background, featuring bold "FOREVER" lettering, a red patterned inner strip, and a strong I-beam design—making it a top choice for BMX riders.

Highlights

I-beam profile
Extra thick tapered sidewalls
Brakes are fine here
Extra thick spoke seats

Description

Take the local park out to lunch with these beastly new rims! Strong, stiff and steady as!

The BSD Forever rim is designed to be stiff both laterally and radially. It features an I-beam design with thick tapered sidewalls, tapered spoke seats, cross-over lacing, and a curved inner strut.

Features

I-beam profile. An I-beam section with a curved inner strut makes the rim stiff both laterally and radially.
Extra thick tapered sidewalls. The sidewalls are thick and tapered, so the rim holds its shape when the landings get heavy.
Brakes are fine here. Unlike a lot of current rims it can be run with brakes, so you are not forced into going brakeless.
Extra thick spoke seats. Thick tapered spoke seats spread the load where the spokes pull hardest on the rim.
Aligned cross-over lacing. The holes are drilled for aligned cross-over lacing, so each spoke sits in line with its path.

Specifications

Material: 6061-T6
Rim width: 36mm
Rim depth: 18mm
Brake surface: Can be used with brakes
Weight: 550g
Note: OD 419mm, ERD 388mm.

Spoke calculator

Display

Pick the part it is laced to and we will give you the lengths to buy.

This rim

Looking up its measurements.

Check or change its figures

ERD effective rim diameter, from the spec sheet mm

Laced to which hub?

Find your hub

Or type its figures

Hub spacing locknut to locknut, 100 front or 110 rear on most BMX mm Same both sides front hubs, or matching flanges

Flange diameter spoke hole centre to the opposite hole centre. The drive side is the driver side, left or right hand drive alike, and is usually the bigger flange

Drive side mm Non-drive side mm

Flange position

Flange to locknut Centre to flange

Drive side mm Non-drive side mm