Ikon Carbon Rim (Braking Surface) / Black/Red / 24 x 1.75 / 36H

Highlights

24 inch, 507 size
Sized for 24 x 1.75
36 hole drilling
Carbon, not alloy

Description

The Ikon carbon rim in 507, which is the 24 inch size, matched to 24 x 1.75 tyres and drilled 36 hole.

It is sold as a rim on its own, so pair it with a 36 hole hub and work out spoke length for the lacing pattern you want before building the wheel.

Features

24 inch, 507 size. The 507 bead seat diameter is the 24 inch standard, so it laces into a cruiser or 24 inch wheel build.
Sized for 24 x 1.75. Matched to 24 x 1.75 tyres, so choose your rubber to suit before building the wheel up.
36 hole drilling. Drilled 36 hole, so pair it with a 36 hole hub and work out spoke length for your lacing pattern.
Carbon, not alloy. A carbon rim, supplied on its own as a rim rather than a built wheel.

Specifications

Wheel size: 507 (24")
Tyre size: 24 x 1.75
Material: Carbon
Hole count: 36H

Spoke calculator

Display

Pick the part it is laced to and we will give you the lengths to buy.

This rim

Looking up its measurements.

Check or change its figures

ERD effective rim diameter, from the spec sheet mm

Laced to which hub?

Find your hub

Or type its figures

Hub spacing locknut to locknut, 100 front or 110 rear on most BMX mm Same both sides front hubs, or matching flanges

Flange diameter spoke hole centre to the opposite hole centre. The drive side is the driver side, left or right hand drive alike, and is usually the bigger flange

Drive side mm Non-drive side mm

Flange position

Flange to locknut Centre to flange

Drive side mm Non-drive side mm