A EXCESS XLC MINI-EXPERT REAR HUB 28H on a white background.

Highlights

28 hole shell
Four sealed bearings
Three pawls, 24 point ring
Alloy axle, CNC bolt caps

Description

The Excess XLC Mini Expert rear hub is a 28 hole race hub built around a 3 pawl, single engagement driver that picks up on a 24 tooth ratchet ring inside the hub shell. Four sealed bearings and an alloy axle keep it rolling, with M6 bolts and alloy CNC bolt caps holding it all together.

The chromoly driver comes with 1mm and 0.5mm chromoly driver spacers and a lock ring, and the rear cog is not included. If you want to run a disc, the supplied alloy lock ring can be swapped for a centre lock disc adapter, sold separately along with the disc.

Features

28 hole shell. A 28 hole drilling suits mini and expert race wheel builds, so it laces straight to a matching rim.
Four sealed bearings. Four sealed bearings keep grit out of the hub and keep the wheel spinning smoothly through race days.
Three pawls, 24 point ring. Three pawls engage as one into a 24 tooth ratchet ring, so the drive picks up predictably out of the gate.
Alloy axle, CNC bolt caps. The alloy axle uses M6 bolts with alloy CNC bolt caps, which keeps weight down at 363 grams.
Disc brake upgrade path. Swap the supplied alloy lock ring for a centre lock disc adapter if you decide to run a disc later.

Specifications

Bearings: 4 sealed
Engagement: 3 pawl single engagement into a 24 tooth ratchet ring
Driver: Chromoly, with 1mm and 0.5mm chromoly spacers and lock ring
Hole count: 28H
Axle: Alloy, M6 bolts with alloy CNC bolt caps
Weight: 363 grams (12.8 ounces)
Note: Rear cog not included. Centre lock disc adapter and disc sold separately.

Spoke calculator

Display

Pick the part it is laced to and we will give you the lengths to buy.

This hub

Looking up its measurements.

Check or change its figures

Hub spacing locknut to locknut, 100 front or 110 rear on most BMX mm Same both sides front hubs, or matching flanges

Flange diameter spoke hole centre to the opposite hole centre. The drive side is the driver side, left or right hand drive alike, and is usually the bigger flange

Drive side mm Non-drive side mm

Flange position

Flange to locknut Centre to flange

Drive side mm Non-drive side mm

Laced to which rim?

Find your rim

Or type its figures

ERD effective rim diameter, from the spec sheet mm