Federal Stance Pro Front Hub w/ Guards / Black

Federal Stance Pro Front Hub w/ Guards / Polished

Highlights

Oversized sealed bearings
Taller flanges, stiffer wheel
Nylon hub guards supplied
3/8 inch female bolts

Description

The Stance Pro front hub is built around the previous top selling Stance, with oversized sealed bearings and taller flanges for a stiffer, more robust front wheel. The axle takes 3/8 inch female bolts and measures 100mm locknut to locknut.

It is supplied with nylon hub guards, so the front end is ready to grind, and the logo is laser etched. Flange diameter is 45mm, with 23mm from flange to locknut.

Features

Oversized sealed bearings. Oversized sealed bearings sit either side of the shell, so the front wheel keeps spinning smoothly and grit stays out.
Taller flanges, stiffer wheel. Taller flanges and bigger bearings make for a more robust and stiffer front wheel than the previous top selling Stance.
Nylon hub guards supplied. Comes with nylon hub guards in the box, so you can grind the front end without buying anything extra.
3/8 inch female bolts. Runs 3/8 inch female bolts, so it drops into forks built for the smaller axle size.
100mm locknut to locknut. Measures 100mm across the axle, with 23mm from flange to locknut and a 45mm flange diameter for working out spoke lengths.

Specifications

Width: 100mm locknut to locknut
Bearings: Oversized sealed bearings
Axle: 3/8 inch female bolts
Included: Nylon hub guards
Note: Flange diameter 45mm, flange to locknut 23mm. Laser etched logo.

Spoke calculator

Display

Pick the part it is laced to and we will give you the lengths to buy.

This hub

Looking up its measurements.

Check or change its figures

Hub spacing locknut to locknut, 100 front or 110 rear on most BMX mm Same both sides front hubs, or matching flanges

Flange diameter spoke hole centre to the opposite hole centre. The drive side is the driver side, left or right hand drive alike, and is usually the bigger flange

Drive side mm Non-drive side mm

Flange position

Flange to locknut Centre to flange

Drive side mm Non-drive side mm

Laced to which rim?

Find your rim

Or type its figures

ERD effective rim diameter, from the spec sheet mm