A black curved Fit 26 inch Rim with white dots.

Highlights

Double wall 26 inch hoop
36 hole drilling
6061 T-6 aluminium
33mm wide, 17mm deep

Description

A 26 inch rim from Fit Bike Co for riders running a big wheel setup. It is a double wall hoop in 6061 T-6 aluminium with a pinned joint, drilled 36 hole so it laces up to a standard 36h hub.

The section measures 33mm wide and 17mm deep, with an ERD of 543mm for working out spoke lengths before you build. Weight is 793g.

Features

Double wall 26 inch hoop. Two walls of aluminium give the rim more to hold onto under hard riding than a single wall section.
36 hole drilling. Laces to any 36h hub, the common count, so spokes and hubs are easy to match up.
6061 T-6 aluminium. Heat treated 6061 T-6 keeps the rim light for the size while still taking the load of a big wheel build.
33mm wide, 17mm deep. A wide section that gives a 26 inch tyre a solid base to sit on.
ERD listed at 543mm. The effective rim diameter is given, so you can work out spoke lengths before you start the build.

Specifications

Wheel size: 26 inch
Width: 33mm
Material: 6061 T-6 aluminium, double wall
Hole count: 36H
Rim depth: 17mm
Weight: 793g
Note: Pinned joint. ERD 543mm.

Spoke calculator

Display

Pick the part it is laced to and we will give you the lengths to buy.

This rim

Looking up its measurements.

Check or change its figures

ERD effective rim diameter, from the spec sheet mm

Laced to which hub?

Find your hub

Or type its figures

Hub spacing locknut to locknut, 100 front or 110 rear on most BMX mm Same both sides front hubs, or matching flanges

Flange diameter spoke hole centre to the opposite hole centre. The drive side is the driver side, left or right hand drive alike, and is usually the bigger flange

Drive side mm Non-drive side mm

Flange position

Flange to locknut Centre to flange

Drive side mm Non-drive side mm