Highlights

Heat treated 4130 chromoly
Legs notched for peg clearance
Flush inner dropout to leg junction
6mm investment cast dropouts

Description

The Kink CST fork is made from 100% 4130 chromoly with TruTemper heat treatment through the whole fork, so it holds up to repeat impacts without carrying extra bulk. The steerer is a one piece machined tube with an integrated bearing race, and the legs are tapered and internally butted to keep the weight down where the strength is not needed.

Peg riders are looked after: the legs are notched for peg clearance and the inner dropout to leg junction is flush so hub guards sit clean. The 6mm investment cast dropouts take a 10mm axle, the steerer measures 165mm with 28mm of offset, and the 7075-T6 alloy compression cap runs a 25x1.5mm thread with a 6mm or 8mm allen key. Weight with the top cap is 960g.

Features

Heat treated 4130 chromoly. TruTemper heat treatment on 100% chromoly means the fork takes repeat landings without needing extra material to survive them.
Legs notched for peg clearance. Tapered, internally butted legs are notched so front pegs sit in close without fouling the fork.
Flush inner dropout to leg junction. Leaves the clearance a front hub guard needs, so grinds run past the dropout instead of catching on it.
6mm investment cast dropouts. Thick cast dropouts around the 10mm axle put material right where the front end takes the most load.
One piece machined 165mm steerer. Integrated bearing race, 28mm offset and a 7075-T6 alloy compression cap that takes a 6mm or 8mm allen key.

Specifications

Material: 100% 4130 chromoly, TruTemper heat treated
Butting: Internally butted
Dropouts: 6mm investment cast, 10mm, flush inner dropout to leg junction
Steerer: 1-pc machined, 165mm, integrated bearing race
Fork offset: 28mm
Fork legs: Tapered and internally butted, notched for peg clearance
Axle size: 10mm
Peg compatible: Yes, legs notched for peg clearance
Weight: 960g with top cap
Note: 7075-T6 alloy compression cap, 25x1.5mm bolt thread, 6mm/8mm allen key