Pride Sevenmotion HD 31.8 Bar / Black / 8.25 inch / 31.8mm Clamp

Highlights

Sizes: 7.5 inch, 8 inch, 8.25 inch
Backsweep: 7 degrees
Upsweep: 1.5 degrees
Bar diameter: 31.8mm
Material: 4130 chromoly, 13 butted, heat treated 20/20 after welding
Note: Requires a 31.8mm stem, it will not fit a standard 22.2mm clamp.

Needs a 31.8mm stem
7 degree backsweep
Fairly flat, not ruler straight
Butted 4130 chromoly

Description

The Pride the Sevenmotion HD Bar is the 31.8mm version of the standard Sevenmotion handlebar. With the oversized clamping section providing extra stiffness where it counts, this set of bars are fairly flat, without being ridiculously straight sporting a 7 degree backsweep and a 1.5 degree upsweep, placing your elbows and shoulders in an optimal position the fire out of the gate.

Constructed from 4130 chromoly and incorporating seamless variable thickness utilising 13 Butted tubing. these bars are also heat treated 20/20 after welding for increased rigidity. Another nice touch is a integrated cutting guide, which means you can cut them down with confidence knowing you won't mess it up.

Make sure that you have a 31.8mm stem like the Pride Cayman V2 HD 31.8 Stem so you can start slamming the gate down as soon as these bars rock up.

Features

Needs a 31.8mm stem. This is the oversized version of the Sevenmotion, so it only clamps into a 31.8mm stem such as the Pride Cayman V2 HD.
7 degree backsweep. Seven degrees of backsweep with 1.5 degrees of upsweep places your elbows and shoulders in an optimal position out of the gate.
Fairly flat, not ruler straight. The shape stays low without going ridiculously straight, so you keep some comfort in the wrists.
Butted 4130 chromoly. Seamless variable thickness 13 butted tubing, heat treated 20/20 after welding, adds rigidity without carrying spare weight.
Integrated cutting guide. Marked so you can cut the bars down to width with confidence and know you will not mess it up.