TNT Front Through Hub / Red Ano / 36H / 20mm

TNT Front Through Hub / Blue Ano / 36H / 20mm

TNT Front Through Hub / Pink Ano / 36H / 20mm

TNT Front Through Hub / Purple Ano / 36H / 20mm

TNT Front Through Hub / Silver Ano / 36H / 20mm

Description

TNT's new 20mm front hub is designed with the unique look that makes this hub stand out from all other brands. Oversized bearings combined with a 7075 T-6 Aluminum thru
axle to create a flex free and smooth experience. Available in 36 hole exclusively, it's available in various colors.

Weight: 215g (without axle)

Hub Details
1. Flange Size = 51.5mm, (measured from center to center
of spoke hole)
2. Flange Distance = 60.5mm, (measured from center of
flange to center of flange)
3. Center of Hub to Center of Flange = 30.25mm
5. Hub Spacing = 100mm (to fit between dropouts)
6. Bearings = 2 Sealed

Specifications

Hub Details
1. Flange Size = 51.5mm, (measured from center to center
of spoke hole)
2. Flange Distance = 60.5mm, (measured from center of
flange to center of flange)
3. Center of Hub to Center of Flange = 30.25mm
5. Hub Spacing = 100mm (to fit between dropouts)
6. Bearings = 2 Sealed

Spoke calculator

Display

Pick the part it is laced to and we will give you the lengths to buy.

This hub

Looking up its measurements.

Check or change its figures

Hub spacing locknut to locknut, 100 front or 110 rear on most BMX mm Same both sides front hubs, or matching flanges

Flange diameter spoke hole centre to the opposite hole centre. The drive side is the driver side, left or right hand drive alike, and is usually the bigger flange

Drive side mm Non-drive side mm

Flange position

Flange to locknut Centre to flange

Drive side mm Non-drive side mm

Laced to which rim?

Find your rim

Or type its figures

ERD effective rim diameter, from the spec sheet mm