Highlights

Built for brakeless
Double wall with a sleeved joint
390g on the scales
36 hole, ERD 383mm

Description

The Alienation Skylark is a 20 inch (406) rim in 6061 T6 aluminium, built double wall with a sleeved joint and drilled 36 hole. There is no machined brake surface, so it is made for running brakeless.

It weighs 390g with an ERD of 383mm, and it is drilled for a Schrader (AV) valve. Choose from black, blue, polished and red.

Features

Built for brakeless. There is no machined brake surface on the sidewall, so this rim is for riders running no rear brake.
Double wall with a sleeved joint. The double wall adds strength where the spokes pull, and the sleeved joint keeps the seam smooth.
390g on the scales. At 390g it is a light rim, and weight out at the rim is the weight you feel most when pumping.
36 hole, ERD 383mm. Standard 36 hole drilling with an ERD of 383mm, so your wheel builder can work out spoke length.
Four colours offered. Black, blue, polished and red, so you can match it to the rest of the wheel.

Specifications

Wheel size: 20" (406)
Material: 6061 T6, double wall, sleeved joint
Hole count: 36 hole
Brake surface: None, brakeless use
Valve: AV (Schrader)
Weight: 390g
Colour: Black, Blue, Polished, Red
Note: ERD 383mm. No brake surface, so it is not suited to rim brakes.

Spoke calculator

Display

Pick the part it is laced to and we will give you the lengths to buy.

This rim

Looking up its measurements.

Check or change its figures

ERD effective rim diameter, from the spec sheet mm

Laced to which hub?

Find your hub

Or type its figures

Hub spacing locknut to locknut, 100 front or 110 rear on most BMX mm Same both sides front hubs, or matching flanges

Flange diameter spoke hole centre to the opposite hole centre. The drive side is the driver side, left or right hand drive alike, and is usually the bigger flange

Drive side mm Non-drive side mm

Flange position

Flange to locknut Centre to flange

Drive side mm Non-drive side mm