Answer 24 x 1.50in Expert Rim 28H (Black CNC-Walls) / Black

Highlights

Double wall, single chamber
Eyeleted spoke holes
24 x 1.5in, 28 hole
Machined rear sidewalls

Description

The Answer BMX Expert 24×1.5″ rim is extruded from lightweight aluminium featuring a double-wall design with single hollow chamber, eyeleted spoke holes for increased nipple support and a pinned seam. Front rim has colour matched sidewall, while rear rim has machined sidewalls to increase braking performance.

Features

Double wall, single chamber. Extruded from lightweight aluminium with a double wall design and a single hollow chamber.
Eyeleted spoke holes. Eyelets give the nipples more support, so the rim holds its tension through hard laps.
24 x 1.5in, 28 hole. A 507mm bead diameter at 24mm wide, drilled 28 hole for a cruiser build.
Machined rear sidewalls. The rear rim has machined sidewalls to increase braking performance, while the front gets a colour matched sidewall.
439g front, 425g rear. Light for an expert rim, with an ERD of 494mm for working out your spoke lengths.

Specifications

Wheel size: 24" (507mm bead diameter)
Material: Extruded aluminium, double wall with single hollow chamber
Hole count: 28H
Nipples: Eyeleted spoke holes
Rim width: 24mm
Brake surface: Machined sidewalls on the rear rim, colour matched sidewall on the front
Weight: 439g front, 425g rear
Note: Pinned seam. ERD 494mm.

Spoke calculator

Display

Pick the part it is laced to and we will give you the lengths to buy.

This rim

Looking up its measurements.

Check or change its figures

ERD effective rim diameter, from the spec sheet mm

Laced to which hub?

Find your hub

Or type its figures

Hub spacing locknut to locknut, 100 front or 110 rear on most BMX mm Same both sides front hubs, or matching flanges

Flange diameter spoke hole centre to the opposite hole centre. The drive side is the driver side, left or right hand drive alike, and is usually the bigger flange

Drive side mm Non-drive side mm

Flange position

Flange to locknut Centre to flange

Drive side mm Non-drive side mm