Answer Carbon Pro Rim / Black / 20 x 1.75 / Braking Surface

Answer Carbon Pro Rim / Black / 20 x 1.75 / Non-brake Surface

Highlights

Suits 20 x 1.60 to 1.90 tyres
Front and rear specific
30mm wide, 27mm deep
36 hole, tubeless ready

Description

Answer BMX carbon rims are just the ticket for carving those tarmac turns like a F1 car. Using a 3k matte black weave, with gloss Answer logos, these carbon BMX race rims are low key, yet high tech. The 20x1.75 rims are 30mm wide, making them suitable for tyres sizes of 20x1.60 up to 20x1.90 and with a 27mm depth, they look ultra low profile and don't scream "look at my carbon rims".

Front and rear (braking surface) specific, you can run two fronts on your race rig if you've moved into the 21st century and have the disc brake set up going for that Euro look. Of course, if you're running V-brakes, make sure you drop a "braking surface" rim in the cart.

Build your dream wheels with LUXBMX by adding a pair of Onyx hubs and Spectre Ti spokes for the lightest, and stiffest set up on the gate.

Features

Suits 20 x 1.60 to 1.90 tyres. The 30mm width takes race tyres from 20 x 1.60 up to 20 x 1.90.
Front and rear specific. The rear rim carries the braking surface, so pick that version if you are still running V-brakes.
30mm wide, 27mm deep. The 27mm depth keeps the profile ultra low key while the 30mm width supports a wide race tyre.
36 hole, tubeless ready. Drilled 36 hole with a Presta valve hole, and tubeless ready if you want to run without a tube.
3k carbon weave. A 3k matte black weave with gloss Answer logos, at 300g for the front and 312g for the rear.

Specifications

Fits: Tyres from 20 x 1.60 to 20 x 1.90
Sizes: 20 x 1.75
Wheel size: 20"
Material: 3k carbon, matte black weave with gloss logos
Hole count: 36
Rim width: 30mm
Rim depth: 27mm
Brake surface: Rear specific rim has the braking surface, the front does not
Valve: Presta
Weight: 300g front, 312g rear
Note: Bead diameter 406mm, ERD 372mm. Tubeless ready.

Spoke calculator

Display

Pick the part it is laced to and we will give you the lengths to buy.

This rim

Looking up its measurements.

Check or change its figures

ERD effective rim diameter, from the spec sheet mm

Laced to which hub?

Find your hub

Or type its figures

Hub spacing locknut to locknut, 100 front or 110 rear on most BMX mm Same both sides front hubs, or matching flanges

Flange diameter spoke hole centre to the opposite hole centre. The drive side is the driver side, left or right hand drive alike, and is usually the bigger flange

Drive side mm Non-drive side mm

Flange position

Flange to locknut Centre to flange

Drive side mm Non-drive side mm