Description

So fresh and so clean! The Cinema FX Front Hub is just that, designed from the ground up, with modern street in mind. Thicker angled hub flanges optimise the spoke line, creating a stiff wheelset that is protected from grinds with the included Cinema CF nylon hub guards. The recessed bearings remove any chance of bearing seat stretch and ensure the hub continues to roll smooth. A 15mm chromoly inner axle provides plenty of strength for all the grinds you can throw at it.

Dimensions:

Axle width (Locknut to Locknut) - 100
Flange diameter - 42mm
Flange to locknut - 16mm

Axle: 15mm Hollow Chromoly Center Axle
Bolts: Chromoly 3/8" (17mm Socket / 6mm Allen)
Shell: 6061-T6 Aluminum 36-Hole
Bearings: 2 x 6902 Sealed Bearings
Cones: 7075-T6 Aluminum Push-On Cones
Guards: Cinema CF Hub Guards
Weight: 337.36g

Features

Spoke calculator

Display

Pick the part it is laced to and we will give you the lengths to buy.

This hub

Looking up its measurements.

Check or change its figures

Hub spacing locknut to locknut, 100 front or 110 rear on most BMX mm Same both sides front hubs, or matching flanges

Flange diameter spoke hole centre to the opposite hole centre. The drive side is the driver side, left or right hand drive alike, and is usually the bigger flange

Drive side mm Non-drive side mm

Flange position

Flange to locknut Centre to flange

Drive side mm Non-drive side mm

Laced to which rim?

Find your rim

Or type its figures

ERD effective rim diameter, from the spec sheet mm