Highlights

Just 221 grams
Alloy axle saves weight
38mm flange diameter
100mm axle width

Description

The Colony Wasp Lite is the light version of Colony's Wasp front hub. Switching to an alloy axle brought the weight of the standard Wasp down to 221 grams.

Flange diameter is 38mm, flange to locknut is 15mm and the axle measures 100mm locknut to locknut. Check those figures against your forks and your spoke lengths before you build it up.

Features

Just 221 grams. The Wasp Lite comes in at 221g, so it takes weight straight off the front wheel.
Alloy axle saves weight. Colony switched the ever popular Wasp to an alloy axle, and that is where the saving comes from.
38mm flange diameter. Flange diameter is 38mm and flange to locknut is 15mm, the numbers you need for working out spoke lengths.
100mm axle width. Measures 100mm locknut to locknut, so check it against the spacing on your forks.
Front hub only. Sold as the front hub on its own, so pair it with your own rim, spokes and nipples.

Specifications

Width: 100mm locknut to locknut
Axle: Alloy
Weight: 221g
Note: Flange diameter 38mm, flange to locknut 15mm.

Spoke calculator

Display

Pick the part it is laced to and we will give you the lengths to buy.

This hub

Looking up its measurements.

Check or change its figures

Hub spacing locknut to locknut, 100 front or 110 rear on most BMX mm Same both sides front hubs, or matching flanges

Flange diameter spoke hole centre to the opposite hole centre. The drive side is the driver side, left or right hand drive alike, and is usually the bigger flange

Drive side mm Non-drive side mm

Flange position

Flange to locknut Centre to flange

Drive side mm Non-drive side mm

Laced to which rim?

Find your rim

Or type its figures

ERD effective rim diameter, from the spec sheet mm