The Eclat Cortex EVO CS Rear Cassette Hub, in black, features dual hub guards, a high-engagement 108 POE system, and "Cortex CS" labeling, shown against a white background.
The Eclat Cortex EVO CS Rear Cassette Hub is shown on a white background with its high-engagement freehub body attachment placed beside it.
The Eclat Cortex EVO CS Rear Cassette Hub in black is shown with its axle, driver, and high-engagement bearing components separated on a white background.
The Eclat Cortex EVO CS Rear Cassette Hub is a metallic BMX street hub featuring black axle bolts and plastic guards on both sides, shown against a plain white background.
The Eclat Cortex EVO CS Rear Cassette Hub is a chrome BMX street hub with black hub guards on both sides, built for axle pegs and heavy-duty performance.

Highlights

  • 108 points of engagement
  • 9T driver, right side drive
  • 14mm chromoly axle
  • Hub guards in the box

Description

The Cortex EVO CS is the updated version of Eclat's classic Cortex cassette hub, rebuilt around a high engagement 108 point, six pawl internal mechanism. The internals were tested and developed alongside the Eclat pro team, and the refined 6061-T6 alloy shell keeps it a strong street hub without going overboard.

It runs a 14mm male hollow bore hardened chromoly axle with a hex key inner axle for easy maintenance, a 36 hole flange and a right side drive 9 tooth driver on a three bearing system. The Viper nylon hub guard and Gong driver guard are included, along with a driver side cone washer if you would rather run it without a guard.

Features
  • 108 points of engagement. Six multi tooth pawls pick up quickly, so a small pedal movement gets you moving when you are pumping through a spot.
  • 9T driver, right side drive. A nine tooth RSD driver drops into a standard street setup without adaptors or extra parts.
  • 14mm chromoly axle. Hardened, heat treated and hollow bored, with a hex key inner axle so you can service it with one tool.
  • Hub guards in the box. Comes with the Viper nylon hub guard and the Gong driver guard, so it is street ready straight away.
  • Three bearing driver. Sealed 6902 bearings in the shell and a three bearing driver keep the whole thing spinning through grinds and drops.

Specifications
  • Material: 6061-T6 alloy refined hub shell
  • Bearings: Sealed: 6902 x2 in the hub, 6802 x2 and 15297 in the driver
  • Engagement: 108 points, 6 pawl multi tooth
  • Driver: RSD (right side drive), 9t
  • Hole count: 36
  • Axle: 14mm male hollow bore, hardened heat treated chromoly, hex key inner axle
  • Included: Viper nylon hub guard, Gong driver hub guard, driver side cone washer for running without a guard
  • Note: Measurements: NDSPCD 45mm, DSPCD 58mm. Flange to cone: drive side 31mm, non drive side 29mm.

Spoke calculator
Display

Pick the part it is laced to and we will give you the lengths to buy.

This hub

Looking up its measurements.

Check or change its figures

Flange diameter spoke hole centre to the opposite hole centre. The drive side is the driver side, left or right hand drive alike, and is usually the bigger flange

Flange position

Laced to which rim?

Or type its figures

Spoke lengths to buy

Drive side —mm
Non-drive side —mm

Pick the rim and your lengths will appear here.

Open the full spoke calculator for offset rims, other cross patterns and measuring help.

Eclat Cortex EVO CS Rear Cassette Hub

Brand: Eclat SKU:

$206.00 USD

Or 4 payments of $51.50 USD with

Colour - Polished

Spoke Holes - 36 Hole

Drive Side - Left Hand Drive

Eclat Cortex EVO CS Rear Cassette Hub - Polished / 36 Hole / Left Hand Drive

$206.00 USD

Price match request

$12.99 flat-rate shipping Australia-wide

Express from $21.99

Free in-store pickup - Brisbane

Availability

Right Hand DriveLeft Hand Drive
Black
Polished

● In stock at LUXBMX ● With supplier ● Preorder ○ Sold out

Need Help ?

Chat with the LUXBMX crew!

Email Us Call Us SMS Us
  • 100% Australian owned
  • Australia's largest BMX range
  • Hassle-free returns
  • Fast trackable shipping