Description

Fiend Cab Front Hub (36H)

These epic hubs from Fiend are ready to tear up the streets! Featuring a flangeless hub shell design to protect your spokes when grinding. The included Hub guards provide even more support so you can rip it up with your mates!

*Internally laced hub. Must build 4 cross pattern*

6061 aluminium 36 hole flangeless hub shell
Chromoly female axle with 24tpi 3/8 bolts
7075 alloy press-fit collars
Includes integrated nylon hub guards
Uses 2 x 6902 bearings
Weight 363g
Build using regular spokes
Must build 4 cross pattern

Specifications

6061 aluminium 36 hole flangeless hub shell
Chromoly female axle with 24tpi 3/8 bolts
7075 alloy press-fit collars
Includes integrated nylon hub guards
Uses 2 x 6902 bearings
Weight 363g
Build using regular spokes
Must build 4 cross pattern

Spoke calculator

Display

Pick the part it is laced to and we will give you the lengths to buy.

This hub

Looking up its measurements.

Check or change its figures

Hub spacing locknut to locknut, 100 front or 110 rear on most BMX mm Same both sides front hubs, or matching flanges

Flange diameter spoke hole centre to the opposite hole centre. The drive side is the driver side, left or right hand drive alike, and is usually the bigger flange

Drive side mm Non-drive side mm

Flange position

Flange to locknut Centre to flange

Drive side mm Non-drive side mm

Laced to which rim?

Find your rim

Or type its figures

ERD effective rim diameter, from the spec sheet mm