Onyx BMX 100/10mm Bolt-on Solid Front Hub / Black Ano / 28H

Onyx BMX 100/10mm Bolt-on Solid Front Hub / Black Ano / 36H

Onyx BMX 100/10mm Bolt-on Solid Front Hub / Clear Ano / 28H

Onyx BMX 100/10mm Bolt-on Solid Front Hub / Matte Black Ano / 36H

Highlights

Solid 10mm axle
100mm hub spacing
Bolts on with axle nuts

Description

A front hub from Onyx built around a solid 10mm bolt on axle, so the wheel is held in the fork with axle nuts.

Hub spacing is 100mm. Check your fork dropouts take a 10mm axle and sit 100mm apart before you order.

Features

Solid 10mm axle. A solid axle at 10mm, so it suits forks with dropouts drilled for the 10mm size.
100mm hub spacing. Spaced at 100mm, so check the gap between your fork dropouts matches before ordering.
Bolts on with axle nuts. Bolt on rather than quick release, which is how a BMX front wheel is normally held in.

Specifications

Fits: Forks with 10mm dropouts
Width: 100mm
Axle: Solid, bolt on
Axle size: 10mm

Spoke calculator

Display

Pick the part it is laced to and we will give you the lengths to buy.

This hub

Looking up its measurements.

Check or change its figures

Hub spacing locknut to locknut, 100 front or 110 rear on most BMX mm Same both sides front hubs, or matching flanges

Flange diameter spoke hole centre to the opposite hole centre. The drive side is the driver side, left or right hand drive alike, and is usually the bigger flange

Drive side mm Non-drive side mm

Flange position

Flange to locknut Centre to flange

Drive side mm Non-drive side mm

Laced to which rim?

Find your rim

Or type its figures

ERD effective rim diameter, from the spec sheet mm