A sleek Spectre Carbon Fibre 507x30mm Rim with black spokes on a white background.

A close up of a black Spectre Carbon Fibre 507x30mm rim with spokes.

A close up of a black Spectre Carbon Fibre 507x30mm Rim bicycle tire with spokes.

A black Spectre Carbon Fibre 507x30mm Rim with spokes on a white background.

A close up of a Spectre Carbon Fibre 507x30mm Rim bicycle rim with spokes.

A close up image of a black Spectre Carbon Fibre 507x30mm Rim bicycle tire featuring carbon fibre construction.

Highlights

24 inch, 30mm wide
468mm ERD
Toray T700 carbon fibre
4D drilled spoke holes

Description

The Spectre 507x30mm rim is laid up from Toray T700 carbon fibre with an understated UD finish and a small tonal logo near the valve hole. The spoke holes are 4D drilled so each one lines up with the spoke path, taking stress off the spoke and nipple.

At 507x30mm this is a 24 inch rim that takes tyres from 24x1.50 to 24x2.10, with an ERD of 468mm for working out spoke length. It is covered by a 2 year warranty against manufacturer defects.

Features

24 inch, 30mm wide. The 507x30mm ETRTO size takes tyres from 24x1.50 to 24x2.10, so it suits cruiser and 24 inch builds.
468mm ERD. Measure your spokes off an ERD of 468mm so the wheel builds up right the first time.
Toray T700 carbon fibre. The highest quality carbon Spectre use, light and stiff, in an understated unidirectional finish.
4D drilled spoke holes. Holes are drilled to follow the spoke path, which reduces stress at the nipple and spoke as you bring the wheel to tension.
Two year warranty. Covered for two years against manufacturer defects, with only minimal tonal branding near the valve hole.

Specifications

Wheel size: 24"
Tyre size: 24x1.50 to 24x2.10 (507x30mm ETRTO)
Material: Toray T700 carbon fibre
Finish: UD (unidirectional), tonal branding near the valve hole
Rim width: 30mm
Note: ERD 468mm. 2 year warranty against manufacturer defects.

Spoke calculator

Display

Pick the part it is laced to and we will give you the lengths to buy.

This rim

Looking up its measurements.

Check or change its figures

ERD effective rim diameter, from the spec sheet mm

Laced to which hub?

Find your hub

Or type its figures

Hub spacing locknut to locknut, 100 front or 110 rear on most BMX mm Same both sides front hubs, or matching flanges

Flange diameter spoke hole centre to the opposite hole centre. The drive side is the driver side, left or right hand drive alike, and is usually the bigger flange

Drive side mm Non-drive side mm

Flange position

Flange to locknut Centre to flange

Drive side mm Non-drive side mm