Sun Envy-Lite Rim / Black / 20 x 1.75 / 36H

Highlights

330g on the scales
Narrow 25mm profile
Still double wall
Front or rear

Description

The Envy-Lite was created to shave grams off a race bike. It keeps the double wall design but runs a narrower 25mm profile, which brings it in 60g under its bigger brother at 330g, so it suits 20 x 1.40 and 20 x 1.60 tyres.

It is drilled 36 hole with a Schrader valve hole, pinned with eyelets, and takes tyres from 20 x 1.40 inch up to 20 x 1.95 inch. It works as either a front or a rear, with a suggested rider weight limit of 80kg.

Features

330g on the scales. Sixty grams under its bigger brother, and that is weight off the rim where it costs you the most to spin up.
Narrow 25mm profile. The narrower rim is built around 20 x 1.40 and 20 x 1.60 tyres, the rubber a race bike tends to run.
Still double wall. Pinned double wall construction with eyelets, so the weight saving does not come straight out of the build.
Front or rear. One rim for either end of the bike, drilled 36 hole with a Schrader valve hole.
80kg rider limit. Sun suggest a rider weight limit of 80kg, so it is one for lighter riders and race duty rather than heavy use.

Specifications

Sizes: 20 x 1.50 inch
Tyre size: Fits 20 x 1.40 inch, 20 x 1.50 inch, 20 x 1.75 inch and 20 x 1.95 inch
Width: 25mm
Material: Aluminium
Hole count: 36 hole
Valve: Schrader
Weight: 330g
Note: Double wall, pinned, eyelets. Bead diameter 406mm, ERD 391mm. Front or rear. Suggested rider weight limit 80kg.

Spoke calculator

Display

Pick the part it is laced to and we will give you the lengths to buy.

This rim

Looking up its measurements.

Check or change its figures

ERD effective rim diameter, from the spec sheet mm

Laced to which hub?

Find your hub

Or type its figures

Hub spacing locknut to locknut, 100 front or 110 rear on most BMX mm Same both sides front hubs, or matching flanges

Flange diameter spoke hole centre to the opposite hole centre. The drive side is the driver side, left or right hand drive alike, and is usually the bigger flange

Drive side mm Non-drive side mm

Flange position

Flange to locknut Centre to flange

Drive side mm Non-drive side mm