TNT M80 Rim / Polished / 36H / 20x 1-1/8th

Highlights

Double wall, aero profile
Pinned and sleeved joint
Machined braking sidewall
36 hole, 340 grams

Description

The TNT M80 rim is aero-shaped and manufactured with a double-wall for added strength which is perfect for those little shredders who are exploring the limits and sending the absolute crap out of any jump on the track. Rest assured mum or dad, they are just going to keep doing this, so you better make sure that you are putting a decent double-walled rim under them.

Features

Double wall, aero profile. The aero shaped double wall extrusion adds strength, so it stands up to hard landings on the track.
Pinned and sleeved joint. The rim join is pinned and sleeved and the spoke holes are eyeleted, spreading load through the seam and around each spoke.
Machined braking sidewall. The sidewall is machined flat, giving rim brake pads a consistent surface to grip.
36 hole, 340 grams. A 36 hole drilling at 340 grams keeps the wheel light without dropping the spoke count.
Sold individually, Presta drilled. Rims come one at a time and are drilled for a Presta (French) valve, so order two and check your tubes match.

Specifications

Wheel size: 20 x 1-1/8"
Finish: Anodised colours with reflective logos and graphics, which can be removed if you prefer
Hole count: 36 hole, eyeleted
Brake surface: Machined sidewall
Valve: Presta (French)
Weight: 340 grams
Note: Sold individually. Pinned and sleeved joint.

Spoke calculator

Display

Pick the part it is laced to and we will give you the lengths to buy.

This rim

Looking up its measurements.

Check or change its figures

ERD effective rim diameter, from the spec sheet mm

Laced to which hub?

Find your hub

Or type its figures

Hub spacing locknut to locknut, 100 front or 110 rear on most BMX mm Same both sides front hubs, or matching flanges

Flange diameter spoke hole centre to the opposite hole centre. The drive side is the driver side, left or right hand drive alike, and is usually the bigger flange

Drive side mm Non-drive side mm

Flange position

Flange to locknut Centre to flange

Drive side mm Non-drive side mm