A Wethepeople Logic 20 Inch Rim constructed with red writing on it.

Highlights

Reinforced spoke hole area
Thicker sidewalls resist denting
6069-T6 alloy, 535 grams
Flash welded joint

Description

The Logic is Wethepeople's first rim, and they took their time over the construction, materials and manufacturing before putting it out to the team. It is a 20 inch, 36 hole, flash welded hoop in 6069-T6 alloy, 35mm wide and 535 grams.

The spoke hole area is heavily reinforced and the sidewalls are thicker to resist denting, which is where most rims give up first.

About the Brand

Wethepeople BMX began making its mark on history almost 15 years ago. Designing the first rough drawings of their frames and forks around the same time as the world started to see BMX in a different light, a time when rails were first grinded and the possibility that riding the streets was in fact the true way forward. To achieve their aims, Wethepeople knows exactly how to deploy their strengths with an efficiency that is unmatched in the BMX industry.

Features

Reinforced spoke hole area. Extra material around the spoke holes takes the tension and the impacts that a rim copes with every session.
Thicker sidewalls resist denting. More material at the sidewall helps the rim hold its shape when you land hard or case something.
6069-T6 alloy, 535 grams. The 6069-T6 alloy keeps the strength up while the rim still weighs a reasonable 535 grams.
Flash welded joint. The rim is flash welded, which keeps the hoop consistent all the way round.
20 inch, 36 hole, 35mm wide. Standard 20 inch 36 hole drilling laces to a regular BMX hub, and the 35mm width gives the tyre a broad base.

Specifications

Wheel size: 20"
Material: 6069-T6 alloy, flash welded
Hole count: 36h
Rim width: 35mm
Weight: 535g

Spoke calculator

Display

Pick the part it is laced to and we will give you the lengths to buy.

This rim

Looking up its measurements.

Check or change its figures

ERD effective rim diameter, from the spec sheet mm

Laced to which hub?

Find your hub

Or type its figures

Hub spacing locknut to locknut, 100 front or 110 rear on most BMX mm Same both sides front hubs, or matching flanges

Flange diameter spoke hole centre to the opposite hole centre. The drive side is the driver side, left or right hand drive alike, and is usually the bigger flange

Drive side mm Non-drive side mm

Flange position

Flange to locknut Centre to flange

Drive side mm Non-drive side mm