WeThePeople Supreme V2 Rear Hub / Black

Highlights

  • Switch drive system
  • 12mm female bolt system
  • Two bearings non drive side
  • One piece 9t driver

Description

The Supreme V2 is a rear cassette hub built around a refined 6061-T6 alloy shell, drilled 36 hole, running a 4130 chromoly female axle with a unique 12mm thread bolt system and a 14mm extension. Three high quality sealed bearings carry it, two of them on the non drive side to increase hub life, and the cones are CNC machined.

The driver is 9t only and uses a full bushing driver system with the ratchet machined into a one piece driver for maximum strength, backed by a new one piece pawl and spring system. It is a switch drive design, PCD is 46/54mm with 27.7mm flange offset, and it weighs 477g.

About the Brand
Wethepeople BMX began making its mark on history almost 15 years ago. Designing the first rough drawings of their frames and forks around the same time as the world started to see BMX in a different light, a time when rails were first grinded and the possibility that riding the streets was in fact the true way forward. To achieve their aims, Wethepeople knows exactly how to deploy their strengths with an efficiency that is unmatched in the BMX industry.

Features
  • Switch drive system. The Supreme V2 can be run as right or left hand drive, so it follows your setup rather than fixing it.
  • 12mm female bolt system. A 4130 chromoly female axle with a 12mm thread bolt and a 14mm extension, so it works with 14mm dropouts.
  • Two bearings non drive side. Three high quality sealed bearings in total, with two on the non drive side to increase hub life.
  • One piece 9t driver. The ratchet is machined into a one piece driver for maximum strength, on a full bushing driver system.
  • 477g, 36 hole. Drilled 36 hole and weighing 477g, with CNC cones and a new one piece pawl and spring system inside.

Specifications
  • Material: 6061-T6 alloy refined hub shell
  • Bearings: 3 high quality sealed
  • Driver: 9t only, full bushing driver system, switch drive
  • Hole count: 36
  • Axle: 4130 chromoly female, 12mm thread bolt with 14mm extension
  • Weight: 477g
  • Note: PCD 46/54mm, flange offset 27.7mm.

Spoke calculator
Display

Pick the part it is laced to and we will give you the lengths to buy.

This hub

Looking up its measurements.

Check or change its figures

Flange diameter spoke hole centre to the opposite hole centre. The drive side is the driver side, left or right hand drive alike, and is usually the bigger flange

Flange position

Laced to which rim?

Or type its figures

Spoke lengths to buy

Drive side —mm
Non-drive side —mm

Pick the rim and your lengths will appear here.

Open the full spoke calculator for offset rims, other cross patterns and measuring help.

Wethepeople Supreme V2 Rear Hub

Brand: Wethepeople SKU:

From

$213.00 USD

 $243.00 USD

Or 4 payments of $53.25 USD with

Colour - Black

Spoke Holes - 36 Hole

Wethepeople Supreme V2 Rear Hub - Black / 36 Hole

Discount 12%

Instead of $243.00

$213.00 USD

Price match request

$12.99 flat-rate shipping Australia-wide

Express from $21.99

Free in-store pickup - Brisbane

Need Help ?

Chat with the LUXBMX crew!

Email Us Call Us SMS Us
  • 100% Australian owned
  • Australia's largest BMX range
  • Hassle-free returns
  • Fast trackable shipping

WE ALSO RECOMMEND:

Eclat Stainless Spokes (40 pack) / 182mm / Black
A set of Eclat Stainless Spokes (40 pack) is shown on the left, with matching spoke nipples on the right, all on a white background—ideal for pairing with our spoke cutting service.
A pack of Eclat Stainless Spokes (40 pack), featuring black spokes with hooked ends and embossed heads, is arranged on a white surface.
ECHP102
ECHP102-174-BLK
Eclat Stainless Spokes (40 pack)

$36.00 USD

Black
174mm176mm178mm180mm182mm184mm186mm188mm190mm192mm
A Wethepeople Logic 20 Inch Rim constructed with red writing on it.
Wethepeople Logic 20 Inch Rim

$107.00 USD

Black
36 Hole - Braking
On a white background, three distinct bicycle rims are showcased: a matte gray BMX rim, the glossy Eclat Crown Rim in black, and a reflective silver rim, each featuring a sleek five-chamber profile.
Eclat Crown Rim / Black
Product Description: The Eclat Crown Rim features a sleek black rim set against a clean white background that exudes modern elegance. This visually striking contrast enhances the overall aesthetic appeal of the Eclat Crown Rim. Ideal
The Eclat Crown Rim is a circular black metal ring made from 6066-T6 alloy, adorned with small engraved symbols that add a touch of mystery and style.
The Eclat Crown Rim, a BMX rim made from 6066-T6 alloy, showcases a sleek silver and black design with branding and measurement markings.
Close-up of an Eclat Crown Rim, showcasing the five-chamber profile with "Crown Eclat Mfg. Co." and specs "6061-T6 Alloy, ETRTO 406x31C" printed in white on a sleek black BMX rim.
Close-up of an Eclat Crown Rim in black, showcasing multiple spoke holes and a sleek five-chamber profile. The rim is angled diagonally against a white background.
The Eclat Crown Rim features high sidewalls, a tubeless design, and a sturdy 5-chamber construction. Made from 6061-T6 alloy, it includes an inner cavity and has a 38mm width perfect for modern tires.
The Eclat Crown Rim, a super heavy-duty BMX rim in black and silver with a five-chamber profile, stands upright on a white background.
Eclat Crown Rim

$128.00 USD

Black
Carbon Gunmetal
Chrome
36 Hole
Eclat E440 Rim (36H) / Black
Eclat E440 Rim (36H) / Carbon Gunmetal
Eclat E440 Rim (36H) / Chrome
Eclat E440 Rim (36H) / Galactic Purple
The Eclat E440 Rim (36H) is a lightweight, circular gold BMX street rim with black accents and heart patterns. It features the model E440 elegantly printed on the side for added distinction.
Three Eclat E440 Rim (36H) units, known for their lightweight build, stacked diagonally with bold white lettering on a dark background.
Close-up of the lightweight Eclat E440 Rim (36H) in purple and dark blue, displaying technical specs and "6061" against a dark background, ideal for a BMX wheelset.
A black and white bicycle rim marked "ECLAT" and "E44," against a dark background. The lightweight Eclat E440 Rim (36H) is engineered for BMX riders seeking a strong wheelset.
Eclat E440 Rim (36H)
$121.00 USD
Black
Carbon Gunmetal
Chrome
Galactic Purple
Gold
36 Hole