A black Answer 24 x 1-1/8in Mini Rim 28H lightweight aluminium bicycle rim on a white background.

Highlights

24 x 1-1/8in mini rim
Double wall, hollow chamber
Eyeleted spoke holes
Machined sidewalls on the rear

Description

The Answer BMX Mini 24×1-1/8in rim is extruded from lightweight aluminium featuring a double-wall design with single hollow chamber, eyeleted spoke holes for increased nipple support and a pinned seam. Front rim has colour matched sidewall, while rear rim has machined sidewalls to increase braking performance.

Features

24 x 1-1/8in mini rim. A 24 inch mini rim in 28 hole drilling, so match it up with a 28 hole hub.
Double wall, hollow chamber. Extruded aluminium in a double wall design with a single hollow chamber, which keeps it strong at 11.1oz.
Eyeleted spoke holes. Every spoke hole is eyeleted for increased nipple support where the tension pulls hardest.
Machined sidewalls on the rear. The rear rim has machined sidewalls to increase braking performance, while the front comes with a colour matched sidewall.
505mm ERD, pinned seam. A pinned seam joins the extrusion, and the 505mm ERD is the number you need to work out spoke length.

Specifications

Wheel size: 24 x 1-1/8in
Material: Extruded aluminium, double wall with single hollow chamber
Hole count: 28H
Nipples: Eyeleted spoke holes
Rim width: 18.5
Brake surface: Machined sidewalls on the rear rim, colour matched sidewall on the front
Weight: 11.1oz
Note: Bead diameter 520mm, ERD 505mm, pinned seam.

Spoke calculator

Display

Pick the part it is laced to and we will give you the lengths to buy.

This rim

Looking up its measurements.

Check or change its figures

ERD effective rim diameter, from the spec sheet mm

Laced to which hub?

Find your hub

Or type its figures

Hub spacing locknut to locknut, 100 front or 110 rear on most BMX mm Same both sides front hubs, or matching flanges

Flange diameter spoke hole centre to the opposite hole centre. The drive side is the driver side, left or right hand drive alike, and is usually the bigger flange

Drive side mm Non-drive side mm

Flange position

Flange to locknut Centre to flange

Drive side mm Non-drive side mm