Highlights

Stiff in both directions
I-beam profile
Extra thick sidewalls
34mm wide, 18mm tall

Description

The BSD NASA rim is designed to be stiff both laterally and radially. It is based on an I-beam design with extra thick tapered sidewalls, extra thick tapered spoke seats, aligned cross over lacing and a curved inner strut.

The profile measures 34mm wide by 18mm tall in 6066-T6 construction, with an ERD of 388mm and a weight of 550g.

Features

Stiff in both directions. Designed to be stiff laterally and radially, so the wheel holds its shape under you.
I-beam profile. An I-beam design with a curved inner strut braces the rim from the inside.
Extra thick sidewalls. Tapered sidewalls are extra thick where the rim takes the hits.
34mm wide, 18mm tall. A wide 34mm by 18mm profile in 6066-T6 construction, weighing 550g.
Aligned cross over lacing. Extra thick tapered spoke seats and aligned cross over lacing spread the load through the spokes.

Specifications

Material: 6066-T6
Rim width: 34mm
Rim depth: 18mm
Weight: 550g
Note: ERD 388mm.

Spoke calculator

Display

Pick the part it is laced to and we will give you the lengths to buy.

This rim

Looking up its measurements.

Check or change its figures

ERD effective rim diameter, from the spec sheet mm

Laced to which hub?

Find your hub

Or type its figures

Hub spacing locknut to locknut, 100 front or 110 rear on most BMX mm Same both sides front hubs, or matching flanges

Flange diameter/PCD (pitch circle diameter) spoke hole centre to the opposite hole centre. The drive side is the driver side, left or right hand drive alike, and is usually the bigger flange

Drive side mm Non-drive side mm

Flange position

Flange to locknut Centre to flange

Drive side mm Non-drive side mm