The Eclat Domain OS Front Load Stem (25.4mm Clamp) is made from strong 6061-T6 alloy, with beveled edges and a four-bolt front plate for secure handlebar attachment.

The Eclat Domain OS Front Load Stem (25.4mm clamp) is a black, oversized stem made from durable 6061-T6 alloy with a two-bolt front load design and circular handlebar opening, shown against a white background.

The Eclat Domain OS Front Load Stem (25.4mm Clamp) is a black, CNC-machined aluminum stem in two parts with assembly bolts, shown on a white background. This oversized stem offers strength and precision for your bike.

The Eclat Domain OS Front Load Stem (25.4mm clamp) is a black, CNC-machined metal BMX stem with visible bolts and engraved branding, featuring an oversized front load design on a plain white background.

Description

Fits: 25.4mm (OS) bars, 1 1/8 inch clamp-on steerer
Rise: 8.5mm
Clamp diameter: 25.4mm (OS) bar clamp
Reach: 50mm
Stack height: 33mm
Material: 6061-T6 alloy, full CNC machined
Weight: 309g
Note: Your bars will need to be 25.4mm to fit this stem.

The Domain is the updated front loader in the Eclat stem family, made for oversized 25.4mm bars. The OS clamping gives your bars more surface to grip, so if you are really tearing it up and your bars keep slipping, this is worth the switch. Your bars need to be 25.4mm as well.

It is fully CNC machined from 6061-T6 alloy with a 50mm reach, 8.5mm rise and 33mm stack, clamping onto a 1 1/8 inch steerer. Offset rear machining improves the clamping, maximum underside machining removes excess material, and larger head 6mm hex bolts finish it off at 309g.

Features

Takes 25.4mm oversized bars. Your bars need to be 25.4mm too, so check before ordering: this stem is not for standard bars.
More surface to stop slipping. The OS clamping and wider faceplate give the bars more to hold onto, which helps if yours keep creeping.
50mm reach front loader. A 50mm reach with 8.5mm rise and 33mm stack, clamping onto a 1 1/8 inch steerer tube.
Larger head 6mm hex bolts. Bigger bolt heads are easier to get a key into and give you more to work with over time.
309g of machined alloy. Fully CNC machined 6061-T6 with the underside cut away, so it holds tight without carrying extra material.