A black Onyx BMX ULTRA SSD ISO OX-110/20mm Thru-bolt Rear Hub with a disc brake mount and sprocket on its sprag internals.

Highlights

Infinite engagement, silent
Ceramic hybrid bearings
One hub, four axle standards
6 bolt ISO disc mount

Description

The Onyx Ultra SSD ISO OX Thru-Bolt Rear Hub is the disc brake mount hub from Onyx and is made to the tightest tolerances on the planet. Using sprag internals for strength, extremely low rolling resistance and infinite points of engagement.

Features

Infinite engagement, silent. The patented sprag clutch picks up the instant you pedal, with no click and no dead spot at the gate.
Ceramic hybrid bearings. Extremely low rolling resistance, with adjustable preload and sideload so you can dial the feel yourself.
One hub, four axle standards. The 20mm axle hub converts to 10mm bolt on, 12mm and 15mm thru axles, so it moves between race back ends.
6 bolt ISO disc mount. Takes a 6 bolt rotor using M5x10mm T25 bolts only, keeping the disc setup simple and secure.
Built for torque. A 7075 shell and hardened stainless driver carry 100% more torque capacity than the Onyx Pro hub, backed by a 5 year limited warranty.

Specifications

Fits: 110mm rear spacing, 6 bolt ISO disc rotor
Material: 7075 aluminium hub shell
Bearings: Ceramic hybrid, adjustable preload and sideload
Engagement: Patented sprag clutch, infinite points, silent instant engagement
Driver: Hardened heat treated stainless steel, OX compatible cogs, integrated labyrinth seal (cog not included)
Hole count: 36
Axle: 20mm, convertible to 10mm bolt on, 12mm and 15mm thru axles
Axle size: 110mm width
Mount: 6 bolt ISO disc, M5x10mm T25 bolts only
Included: Titanium bolts, knurled stainless washers with grippers
Note: Thru-bolt axles sold separately. Tightening axle bolts beyond 12NM voids the warranty. Made in the USA.

Spoke calculator

Display

Pick the part it is laced to and we will give you the lengths to buy.

This hub

Looking up its measurements.

Check or change its figures

Hub spacing locknut to locknut, 100 front or 110 rear on most BMX mm Same both sides front hubs, or matching flanges

Flange diameter/PCD (pitch circle diameter) spoke hole centre to the opposite hole centre. The drive side is the driver side, left or right hand drive alike, and is usually the bigger flange

Drive side mm Non-drive side mm

Flange position

Flange to locknut Centre to flange

Drive side mm Non-drive side mm

Laced to which rim?

Find your rim

Or type its figures

ERD effective rim diameter, from the spec sheet mm

Spoke count Cross pattern

Spoke lengths to buy

Drive side —mm

Non-drive side —mm

Pick the rim and your lengths will appear here.

Open the full spoke calculator for offset rims, other cross patterns and measuring help.

Want a custom colour?

This hub is also made to order in every colour Onyx offers - pick your shell and widget colours with a live preview.

Open the hub builder

Onyx BMX ULTRA SSD ISO OX-110/20mm Thru-bolt Rear Hub

Name: Onyx BMX ULTRA SSD ISO OX-110/20mm Thru-bolt Rear Hub
Brand: Onyx
SKU: 086326-ANOBLK-36
Price: 899.99 AUD
Availability: InStock
Rating: 5.0 (1 reviews)