The Pride Fusion front hub is built for BMX race, with a 6061-T6 aluminium shell, 100x10mm spacing and 28 hole drilling. It runs 6805 (25x37x7mm) bearings with re-engineered internal geometry to handle lateral loads, and one side of each bearing gets a reinforced seal to keep water, mud and the pressure washer out.
It bolts in with titanium M10x1.25 hub bolts and weighs 245g. The 28 hole Fusion only comes in 10mm, and front and rear hubs are sold separately if you're after the matching Fusion rear.
- 6061-T6 aluminium shell, 245g
- 100x10mm spacing, 28 hole
- 6805 (25x37x7mm) bearings with reinforced seals
- Titanium M10x1.25 hub bolts
Wethepeople
Raven
Sunday
Chase
Radio
Kink
Cult
Fit Bike Co
Odyssey
Eclat
Salt
Profile Racing
Federal
BSD BMX
Cinema BMX
Meybo
SD
Box Components
Avian
LUXBMX
S&M
Hoffman






