Highlights

Takes the place of the jam nut
7075 aluminium build
For 9 and 10 tooth drivers
Integrated 14mm step

Description

The Profile Racing Aegis drive side hub guard is machined from 7075 aluminium and takes the place of your drive side jam nut. A steel press piece does the job of the cone spacer and jam nut, so the guard becomes part of the hub rather than an extra part stacked on the end.

An integrated aluminium 14mm step sits in your dropout and acts as an anti rotational pin. It suits 9 and 10 tooth drivers, and works on Profile Mini, Profile Totem and Madera V-2 hubs. It weighs 63 grams and comes in RHD or LHD, so check which side you need before ordering.

About the Brand

For over 35 years, Profile Racing parts have been the top choice for all types of BMX riding. Profile Racing is the single largest, most capable and most sophisticated manufacturer of high-end BMX bicycle components in the United States.

Features

Takes the place of the jam nut. A steel press piece substitutes the drive side jam nut, so the guard becomes your new cone spacer and jam nut.
7075 aluminium build. Machined from 7075 aluminium so it can take grinds without adding much weight at 63 grams.
For 9 and 10 tooth drivers. Suits 9t and 10t drivers. Your chain will rub if you run an 11t driver.
Integrated 14mm step. The aluminium 14mm step seats in your dropout and works as an anti rotational pin.
RHD or LHD, pick your side. Works on Profile Mini, Profile Totem and Madera V-2 hubs, so make sure you order the side you ride.

Specifications

Fits: Profile Mini, Profile Totem and Madera V-2 hubs
Material: 7075 aluminium with steel press piece
Driver: For 9 and 10 tooth drivers
Axle size: Integrated aluminium 14mm step for the dropout
Weight: 63 grams, 2.2 ounces
Note: Comes in RHD or LHD, order the side you need. Your chain will rub with an 11t driver.