Highlights

Width: 2mm thick
Bolt pattern: 6 bolt

Two millimetres of spacing
Six bolt pattern
Sits behind the rotor

Description

A 2mm disc spacer from SD, drilled to the 6 bolt pattern. It goes between the hub and the rotor when you need the disc sitting a touch further out.

Small part, quick job: unbolt the rotor, drop the spacer in behind it and torque the bolts back up. Check the 6 bolt pattern matches your hub and rotor before you order.

Features

Two millimetres of spacing. The spacer is 2mm thick, so you know exactly how far out it moves the rotor before you pull the wheel.
Six bolt pattern. Drilled for the 6 bolt disc pattern, so it lines up with a 6 bolt hub and rotor without any mucking about.
Sits behind the rotor. It stacks between hub and disc, so the bolts go back through the same holes and nothing else on the wheel changes.