Stay Strong Rim 24x1.75in 36H Front / Polished / 36 Hole

Highlights

Built for 24 inch wheels
36 hole drilling
CNC machined sidewalls
Brake friendly surface

Description

Stay Strong's EVO Rim is unsurprisingly super strong. Made from an alloy with CNC'd sidewalls for additional strength, this BMX Rim is ready for a custom-build. If you're looking for a fast, smooth, and durable rim to handle plenty of tricks and airtime with the occasional heavy or mistimed landing then Stay Strong's BMX Rim will prove to be a worthy

Surface can be used for braking.

Features

Built for 24 inch wheels. A 24 x 1.75 inch front rim, ready to lace into a cruiser or a bigger wheeled custom build.
36 hole drilling. Standard 36H spoke count, so it pairs with common front hubs and spoke lengths.
CNC machined sidewalls. Machining the sidewalls adds strength and leaves a flat, true surface all the way around.
Brake friendly surface. The sidewall can be used for braking, so you can run a rim brake up front.
Takes heavy landings. Made from alloy and built for plenty of tricks and airtime, including the occasional heavy or mistimed landing.

Specifications

Wheel size: 24 inch
Material: Alloy
Hole count: 36H
Rim width: 1.75 inch
Brake surface: CNC machined sidewalls, brake compatible
Note: Front rim.

Spoke calculator

Display

Pick the part it is laced to and we will give you the lengths to buy.

This rim

Looking up its measurements.

Check or change its figures

ERD effective rim diameter, from the spec sheet mm

Laced to which hub?

Find your hub

Or type its figures

Hub spacing locknut to locknut, 100 front or 110 rear on most BMX mm Same both sides front hubs, or matching flanges

Flange diameter/PCD (pitch circle diameter) spoke hole centre to the opposite hole centre. The drive side is the driver side, left or right hand drive alike, and is usually the bigger flange

Drive side mm Non-drive side mm

Flange position

Flange to locknut Centre to flange

Drive side mm Non-drive side mm