Tangent Expert/Pro Carbon 1-1/8th Inch Fork / Grey/Red / 20mm

Description

Material: Complete carbon fibre construction
Dropouts: 20mm
Steerer: Straight 1-1/8th
Fork offset: 29mm
Colour: Grey/grey, minimal graphics
Note: Includes top cap and compression bolt.

With a complete carbon fibre construction, the Tangent Expert/Pro fork is ready to fit directly into your Rift frame, or any other expert or pro frame out there that in manufactured with a straight 1-1/8th head tube. These are the perfect fork for the young rider on a expert or expert XL frame looking for a fork that's strong, yet light.

Older riders could, with the right conversion headset, run these forks in a tapered frame, but we always recommend that you run a tapered fork in a frame with a tapered head tube to keep everything nice and tight in the front end. Lucky Tangent have you covered here with a Pro Tapered fork available in their range.

With minimal graphics, almost stealth on the grey/grey, these forks will look the biz on any brand out there.

These forks have 20mm dropout and include the top cap/compression bolt, and with a 29mm off-set, they'll sharpen up your steering.

Features

Complete carbon fibre construction. Strong yet light, which is what a young rider on an expert or expert XL frame is after.
Straight 1-1/8 fit. Goes straight into a Rift frame or any other expert or pro frame made with a straight 1-1/8th head tube.
29mm offset sharpens your steering. Offset is set to quicken the steering, so the front end responds faster out of the gate.
20mm dropouts, top cap included. Built for a 20mm race axle, with the top cap and compression bolt supplied so nothing else is needed.
For straight head tubes, not tapered. A conversion headset would let this run in a tapered frame, but Tangent's Pro Tapered fork is the right call there.