Two lightweight Tangent Turbyne Carbon Brake Rim 406mm (Each) (36H) carbon fiber bicycle rims with white branded graphics.

Highlights

4K high modulus carbon
Light at 322g each
Has a braking surface
30mm wide, 36 hole

Description

The folk at Tangent know how turn out fast parts and the Turbyne rim is manufactured from industry leading 4K high modulus carbon fibre. With graphics that you can see from the moon, you competition will be in doubt that you're on the gate to win.

Nice and light at just 322g, the Tangent carbon rims are only 30mm wide keeping things compact. Fit any tyre from a 1.5 to a 1.85 on these F1 hoops.

Features

4K high modulus carbon. Manufactured from industry leading 4K high modulus carbon fibre, so it stays stiff on the gate without the weight of alloy.
Light at 322g each. Just 322g per rim, which takes weight off the wheels where it slows you down the most.
Has a braking surface. This version is built with a braking surface, so you can still run a rim brake.
30mm wide, 36 hole. A compact 30mm width with 36 hole drilling, so it laces up to standard race hubs.
Fits 1.5 to 1.85 tyres. Takes any 20 inch race tyre from 1.5 up to 1.85, with a Presta valve hole.

Specifications

Sizes: 20" x 1.75" (406mm)
Tyre size: 1.5 to 1.85
Width: 30mm
Material: 4K high modulus carbon fibre
Finish: Tangent Turbyne graphics
Hole count: 36H
Brake surface: Yes
Valve: Presta
Weight: 322g
Note: ERD 367mm. Sold individually.

Spoke calculator

Display

Pick the part it is laced to and we will give you the lengths to buy.

This rim

Looking up its measurements.

Check or change its figures

ERD effective rim diameter, from the spec sheet mm

Laced to which hub?

Find your hub

Or type its figures

Hub spacing locknut to locknut, 100 front or 110 rear on most BMX mm Same both sides front hubs, or matching flanges

Flange diameter/PCD (pitch circle diameter) spoke hole centre to the opposite hole centre. The drive side is the driver side, left or right hand drive alike, and is usually the bigger flange

Drive side mm Non-drive side mm

Flange position

Flange to locknut Centre to flange

Drive side mm Non-drive side mm