Highlights

Built for 16 inch wheels
Double wall construction
Only 330 grams
36 hole drilling

Description

The Black Sheep is Alienation's 16 inch rim, made for intermediate jump, park and street riding on the smaller bikes.

It is a double wall 6061 T6 rim with a pinned joint, drilled 36 hole with an AV valve hole. Diameter is 305 (16"), ERD is 292mm and it weighs 330g.

Features

Built for 16 inch wheels. A 305 diameter rim for 16 inch bikes, so a smaller rider gets a proper rim rather than a stock one.
Double wall construction. Double walls give the rim the strength for intermediate jump, park and street riding.
Only 330 grams. At 330g it keeps the weight off a small wheel, which makes the bike easier to get moving.
36 hole drilling. Drilled 36 hole, so it laces to a standard 36 hole hub with standard spokes.
6061 T6 with pinned joint. Made from 6061 T6 aluminium with a pinned joint, and drilled AV for a Schrader valve tube.

Specifications

Wheel size: 16in, 305
Material: 6061 T6, double wall, pinned joint
Hole count: 36
Valve: AV
Weight: 330g
Note: ERD 292mm. Suits intermediate jump, park and street riding

Spoke calculator

Display

Pick the part it is laced to and we will give you the lengths to buy.

This rim

Looking up its measurements.

Check or change its figures

ERD effective rim diameter, from the spec sheet mm

Laced to which hub?

Find your hub

Or type its figures

Hub spacing locknut to locknut, 100 front or 110 rear on most BMX mm Same both sides front hubs, or matching flanges

Flange diameter/PCD (pitch circle diameter) spoke hole centre to the opposite hole centre. The drive side is the driver side, left or right hand drive alike, and is usually the bigger flange

Drive side mm Non-drive side mm

Flange position

Flange to locknut Centre to flange

Drive side mm Non-drive side mm