Highlights

Flangeless 7075 shell
Spins on sealed bearings
Female 3/8 inch bolts
Two hub guards included

Description

The Sherman is Animal's premium front hub. It uses a flangeless 7075 shell to protect the hub and the spokes, and it is laced four cross for strength.

Female 3/8 inch bolts lock the hub into the fork and it spins on sealed bearings. Two replaceable hub guards are included, along with the Animal tank badge.

Features

Flangeless 7075 shell. The flangeless design protects both the hub and the spokes, and 7075 keeps the shell strong.
Spins on sealed bearings. Sealed bearings keep dirt and water out of the hub, so it keeps rolling smoothly.
Female 3/8 inch bolts. Female bolts thread into the axle and lock the hub into the fork, keeping everything tight.
Two hub guards included. Both guards are replaceable, so you can swap them out as they wear rather than replacing the hub.
Four cross lace. The hub is built to lace four cross, which puts more spoke overlap into the wheel for strength.

Specifications

Material: 7075 shell
Bearings: Sealed
Spokes: 4 cross lace
Axle: 3/8 inch female bolts
Included: 2 replaceable hub guards, tank badge
Note: Flangeless design.

Spoke calculator

Display

Pick the part it is laced to and we will give you the lengths to buy.

This hub

Looking up its measurements.

Check or change its figures

Hub spacing locknut to locknut, 100 front or 110 rear on most BMX mm Same both sides front hubs, or matching flanges

Flange diameter/PCD (pitch circle diameter) spoke hole centre to the opposite hole centre. The drive side is the driver side, left or right hand drive alike, and is usually the bigger flange

Drive side mm Non-drive side mm

Flange position

Flange to locknut Centre to flange

Drive side mm Non-drive side mm

Laced to which rim?

Find your rim

Or type its figures

ERD effective rim diameter, from the spec sheet mm