Animal Sherman Hybrid Rear Hub in black metal, shown from the side with bolts and axle, isolated on a white background. Includes hub guards for added protection.

The Animal Sherman Hybrid Rear Hub, shown on a white background, includes an axle and two black plastic hub guards (one notched)—perfect for hybrid freecoaster setups.

Highlights

Cassette or freecoaster, your call
Nine tooth driver
Oversized hub guards both sides
14mm female bolts

Description

Animal Bikes have done it again. With a very limited number, these won't last long.

The Animal Sherman hub has been designed around the Hybrid system and beefed up with a larger female 14mm internal bolt.

The oversized hub guards will keep your spokes safe and wheels straight while smashing your pegs on everything in sight.

Use it as a Cassette or as a freecoaster and never buy another hub again! Animal even put a nice little badge on every hub to make sure everyone knows what you're riding!

Features

Cassette or freecoaster, your call. The Sherman is built around the Hybrid system and can be run either way with the included springs, so one hub covers both.
Nine tooth driver. A 9 tooth driver runs a small gear, so it suits a standard BMX setup without adaptors.
Oversized hub guards both sides. Replaceable drive and non drive side guards keep your spokes safe and the wheel straight when you are smashing pegs.
14mm female bolts. Beefed up with a larger female 14mm internal bolt, so make sure your dropouts and pegs suit 14mm.
Sealed bearings. Sealed bearings keep grit out of the hub, so it keeps spinning smoothly season after season.

Specifications

Bearings: Sealed
Driver: 9 tooth
Axle: 14mm female bolts
Included: Springs to run it as a cassette or freecoaster, replaceable drive and non drive side hub guards
Note: Hybrid design, 14mm only. Tank badge on every hub.

Spoke calculator

Display

Pick the part it is laced to and we will give you the lengths to buy.

This hub

Looking up its measurements.

Check or change its figures

Hub spacing locknut to locknut, 100 front or 110 rear on most BMX mm Same both sides front hubs, or matching flanges

Flange diameter/PCD (pitch circle diameter) spoke hole centre to the opposite hole centre. The drive side is the driver side, left or right hand drive alike, and is usually the bigger flange

Drive side mm Non-drive side mm

Flange position

Flange to locknut Centre to flange

Drive side mm Non-drive side mm

Laced to which rim?

Find your rim

Or type its figures

ERD effective rim diameter, from the spec sheet mm