Chase Edge Mini Bike (2023) / Blue / 17.25TT

Chase Edge Mini Bike (2023) / Teal / 17.25TT

Description

Chase Bicycles have again knocked it right out of the park with their 2023 Edge range. Starting here with their first 20 inch bike, the Chase Edge Mini, this bike packs a punch coming spec'd straight from the factory with a disc brake! With what we predict will become the norm for braking, your young racer will start out on the very best in performance with the frame on the brand's Edge Mini manufactured with the same hydroformed and triple butted tubing as the bigger bikes in the range and includes features like enclosed dropouts. The part's list mirrors quality like that of its bigger brothers as well, with Chase Edge CroMo forks, Tioga PowerBlock 20 x 1-1/8th tyres and Insight chainring, grips and pivotal mini seat.

With dedicated race geometry and lightweight design, the Chase Mini race bike is just the ticket for the racer entering the Sprocket racing ranks and is biting at the bit to send it down the big hill like the big kids. Get ready to be tagging #winwithchase regularly as your racer enters the winning arena.

All in all, this is one of the coolest, highest spec'd Mini race bikes currently available on the market and will set up your young rider for a life of BMX racing on of the most developed complete Mini race bikes to date. If 2022 is anything to go by, these will sell out fast.

Features

Disc brake from the factory. A mechanical disc calliper on a 140mm rotor, so your young racer starts out on the same braking the bigger bikes run.
Same tubing as the bigger bikes. Triple butted hydroformed 6061 T6 alloy with enclosed rear dropouts and an integrated chain tensioner, in a 17.25" top tube.
Full Cr-Mo Chase Edge fork. A 1" steer tube with tapered blades up front, matched to the dedicated race geometry of the Edge Mini frame.
Tioga PowerBlock race tyres. 20"x1-1/8" front and rear on Chase Edge 118 double wall rims, laced 24H at the front and 28H at the rear.
Race ready at 7.59kg. Weighed without pedals, with 140mm alloy cranks and an Insight 38T chainring driving a 16T cog for a 48.44" ratio.

Specifications

Size: 17.25TT
Frame: Chase Edge Mini, triple butted hydroformed 6061 T6 alloy, enclosed rear dropouts, integrated chain tensioner system
Top tube: 17.25"
Fork: Chase Edge Mini, full Cr-Mo, 1" steer tube with tapered blades
Headset: Integrated sealed bearing
Stem: Chase Edge 40mm
Bars: Chase Edge 22.2mm, 2.25" rise, 22.5" wide, 8° back sweep, 2° up sweep
Grips: Insight C.O.G.S 115mm, alloy clamps, laser etched logo, PVC end plug
Brakes: Mechanical disc calliper, 140mm disc rotor, rear
Brake lever: Linear-pull lever
Cranks: Chase Edge 3 piece crank, 140mm alloy arm with laser etched logo, Cr-Mo chainring bolts and nuts
Bottom bracket: Euro sealed BB
Chainring: Insight 38T, 5 bolt, BCD 110mm
Pedals: Alloy sealed
Front hub: Chase Edge Mini, 3/8" axle, sealed bearings
Rear hub: Chase Edge Mini, 3/8" axle, sealed bearings, steel cassette body, Triple Precise rear hub clutch system with ISO disc brake standard (3 pawls at triple angle engagement for 24T ratchets)
Rear cog: 16T
Rims: Chase Edge 118 double wall 20"x1-1/8", 24H front and 28H rear
Tyres: Tioga PowerBlock 20"x1-1/8" front and rear
Seat: Insight Mini Pivotal
Seat clamp: Chase Edge QR alloy 28.6mm
Gearing: 38x16, 48.44" ratio, 140mm crank length
Weight: 7.59kg (without pedals)
Note: Chase give the weight as 7.59kg in the spec table and 7.95kg in their key specs, both without pedals.

Assembly information

Your race bike ships mostly assembled in the box. Finishing it takes most people 10 to 20 minutes with basic tools, and the video above walks through every step.

Fit the handlebars and line them up with the front wheel
Fit the front wheel, pedals and seat post
Spin the rear wheel and check the rotor runs clear of the calliper
Check the brake and tyre pressure before the first ride

Disc brakes: keep your fingers off the rotor and pads, because oil from your skin contaminates the braking surface and takes the bite away. If the rotor rubs, loosen the two calliper bolts, squeeze the lever, then tighten them again with the lever held on. Bed the brake in with a few firm stops before you race it.

Tools: Allen key set and a 15mm spanner for the pedals. Check your axle hardware, since race bikes vary between bolt-on nuts and a thru-axle.

Rather have it done? Ask us about extra assembly before you order, or any local bike shop can finish the build for a small fee.

Chase Edge Mini Bike

Name: Chase Edge Mini Bike
Brand: Chase
SKU: 65CB230202MINITEAL
Price: 1194.99 AUD
Availability: OutOfStock

Brand: Chase SKU: Click to copy the SKU and show the pick location

$1,194.99 AUD

Or 4 payments of $298.74 AUD with

Recommended Rider Height:

110-140cm

Colour - Teal

Top Tube Length - 17.25

Race frames are sized by class, and the class you ride is set by rider height rather than age.

Size	Rider height	Top tube
Micro (18" wheels)	Under 120cm	16.25"
Mini (20" wheels)	110 to 140cm	17 to 18"
Junior	120 to 150cm	18.25 to 18.75"
Expert	130 to 170cm	19.5 to 19.75"
Expert XL	145 to 170cm	20 to 20.75"
Pro	150 to 175cm	20.25 to 20.75"
Pro XL	165 to 180cm	21 to 21.25"
Pro XXL	170 to 185cm and up	21.5 to 21.85"
Pro XXXL	175cm and up	22"
Pro XXXXL	180cm and up	22.5"
Cruiser (24" wheels)	175cm and up	21.5" and up

Heights overlap between classes on purpose. Where you land in two, a growing rider is usually better on the larger, and a rider who wants the bike to turn faster on the smaller. Some brands label the Pro size Pro L, with the same fit.

How to measure

Stand your rider against a wall in the shoes they ride in, heels flat, and mark the top of their head. Measure from the floor to the mark.

Between two sizes and still growing? Take the larger size.
Racing gates and wanting the bike to turn faster? Take the smaller size.
Top tube is the number that actually changes the fit, so compare it against the bike they ride now.

Not sure? Send us their height and we will tell you what we would put them on.

Read the full buying guide