Highlights

  • Yes, it crankflips
  • Three point clutch
  • Hub guard included
  • No play building up

Description

The Eclat Cortex Freecoaster is in our opinion best freecoaster on the market just got better with the addition of a non-drive side plastic hub guard. Eclat went back to the drawing board when creating the new Cortex Freecoaster hub.
With a redesigned driver, drive side bearing, clutch resistance mech and axle the Eclat Cortex could be one of the best designed freecoaster hubs on the market.

"

Lets break it down for you?

The biggest issue with clutch style freecoasters was always that they generated “play” over time. When the clutch threads into the driver, it acts like a vice and clamps the large drive side hub bearing and ultimately will cause large loads on that bearing causing it to weaken and become loose. We solved this issue by using a special “c-clip” which sits freely behind the non-drive side bearing, preventing the force of the clutch from damaging the bearings and destroying them. This special part really gives the Cortex a huge advantage over other hubs and enables you to give it as much side impact as possible, without the hub generating play.

After 2 years of heavy testing, we still have team riders riding the Cortex hub as good as it was the day it was laced up.

" -Eclat BMX

Features

  • Yes, it crankflips. It comes out of the box with just under 1/4 crank of slack, and small spacers behind the clutch shrink that if you want less.
  • Three point clutch. Three friction points instead of the usual two spread load across a larger section of the clutch, so it lasts and needs next to no maintenance.
  • Hub guard included. The V2 comes with the Viper nylon fibreglass guard for the non-drive side, so the flange is covered from day one.
  • No play building up. A free floating c-clip behind the non-drive side bearing stops the clutch clamping and weakening the drive side bearing.
  • 110mm axle width. Measured locknut to locknut it runs 110mm, with a 59mm drive side flange and a 52mm non-drive side flange.

Specifications

  • Axle: 110mm locknut to locknut
  • Included: Viper nylon fibreglass hub guard, clutch spacers
  • Note: Drive side flange 59mm, non-drive side flange 52mm. Drive side flange to locknut 31mm, non-drive side 29mm.

Spoke calculator

Display

Pick the part it is laced to and we will give you the lengths to buy.

This hub

Looking up its measurements.

Check or change its figures

Flange diameter/PCD (pitch circle diameter) spoke hole centre to the opposite hole centre. The drive side is the driver side, left or right hand drive alike, and is usually the bigger flange

Flange position

Laced to which rim?

Or type its figures

Spoke lengths to buy

Drive side —mm
Non-drive side —mm

Pick the rim and your lengths will appear here.

Open the full spoke calculator for offset rims, other cross patterns and measuring help.

Eclat Cortex V2 Freecoaster Hub

Brand: Eclat SKU: Click to copy the SKU and show the pick location

Sale priceFrom

$299.99 AUD

Regular price$341.99 AUD

Or 4 payments of $74.99 AUD with

Option - RHD

Size - 9T

Colour - Black


Eclat Cortex V2 Freecoaster Hub - RHD / 9T / Black

Discount 12%

Instead of $341.99

$299.99 AUD

Price match request

$12.99 flat-rate shipping Australia-wide, Express from $21.99

Free in-store pickup - Brisbane

Availability

RHDLHD
Black

● In stock at LUXBMX ● With supplier ● Preorder ○ Sold out

Need Help ?

Chat with the LUXBMX crew!

  • 100% Australian owned
  • Australia's largest BMX range
  • Hassle-free returns
  • Fast trackable shipping

WE ALSO RECOMMEND:

Eclat Bondi Logo Straight Wall Rim (36H)
Sale price From

$107.99 AUD

Regular price

$129.99 AUD

Price match request

Seen it cheaper somewhere else? Send us the link and we'll take a look.