The Eclat Locator Rim is a black, circular metal BMX rim with white markings and symbols evenly spaced around its surface, designed for lightweight performance and shown against a white background.

The Eclat Locator Rim is a black BMX rim with a lightweight design, displayed without spokes or tire against a white background.

Close-up of the Eclat Locator Rim in black, showing multiple spoke holes and two small white logos. This lightweight BMX rim features éclat LOCATOR technology, photographed against a white background.

Close-up of the Eclat Locator Rim, a black BMX rim with drilled holes and white text highlighting the manufacturer, specs, welded construction, material details, size info, and lightweight design.

The Eclat Locator Rim is a curved black metal rim with "LOCATOR" engraved in white capitals, designed to be lightweight and ideal for BMX bikes.

Close-up view of the Eclat Locator Rim, a black BMX rim known for its lightweight design, distinct labeling, and numerous spoke holes along the edge.

Highlights

Dome shaped spoke seats
Straight walls for brakes
Thick side walls
436g in 36 hole

Description

The Locator is a new addition to the eclat rim family, built around their exclusive LOCATOR technology. A dome shaped profile puts more material around each spoke hole, giving a stronger spoke seat and precision drilling for angle correct spoke alignment.

That lets the rim run lighter and stronger, and lace up to absolute perfection. It is a strong double wall design with thick side walls to prevent dents on hang ups, and straight side walls so you can run a brake.

Features

Dome shaped spoke seats. More material around each spoke hole gives a stronger seat and an angle correct drilling, so the wheel laces up true.
Straight walls for brakes. Straight side walls give your pads a flat surface to work on, so a brake is on the table.
Thick side walls. The side walls are built thick to prevent dents when you come up short and hang up.
436g in 36 hole. A 34 x 16mm double wall section in 6061-T6, flash welded, at 436g and drilled 36 hole.
389mm ERD. A 419mm diameter and 406mm ETRTO with a 389mm ERD, so spoke lengths are easy to work out.

Specifications

Material: 6061-T6, flash welded
Hole count: 36h
Rim width: 34mm
Rim depth: 16mm
Brake surface: Straight side walls, brake compatible
Weight: 436g / 15.3oz
Note: Diameter 419mm, ERD 389mm, ETRTO 406mm.

Spoke calculator

Display

Pick the part it is laced to and we will give you the lengths to buy.

This rim

Looking up its measurements.

Check or change its figures

ERD effective rim diameter, from the spec sheet mm

Laced to which hub?

Find your hub

Or type its figures

Hub spacing locknut to locknut, 100 front or 110 rear on most BMX mm Same both sides front hubs, or matching flanges

Flange diameter/PCD (pitch circle diameter) spoke hole centre to the opposite hole centre. The drive side is the driver side, left or right hand drive alike, and is usually the bigger flange

Drive side mm Non-drive side mm

Flange position

Flange to locknut Centre to flange

Drive side mm Non-drive side mm