Excess Mini-Expert Front Hub / Black / 28H / 10mm

Highlights

28 hole front hub
Two sealed bearings
Alloy axle and end caps
131 grams on the scales

Description

The Excess Mini-Expert 28H Front Hub is the perfect companion to the rear Mini-Expert hub by the same company. Match these up to build up the perfect set of wheels for your sprocket jockey. Sealed bearings, Excess component quality and a reputation for winning means that you won't go wrong with this hub. Especially at this price!

Features

28 hole front hub. Drilled for 28 spokes, so match it to a 28 hole rim when you order your build.
Two sealed bearings. Sealed cartridge bearings keep the grit out, so the front wheel keeps spinning freely.
Alloy axle and end caps. Alloy axle and alloy end caps hold the weight down at the front of the bike.
131 grams on the scales. 4.6 ounces, or 131 grams, which is light for a rolling part on a mini or expert race bike.
Pairs with the Mini-Expert rear. Built as the companion to the Excess Mini-Expert rear hub, so the two make a matched wheelset.

Specifications

Material: Alloy axle and alloy end caps
Bearings: 2 sealed
Hole count: 28
Included: M6 bolts with CNC alloy bolt caps
Weight: 131g (4.6 oz)

Spoke calculator

Display

Pick the part it is laced to and we will give you the lengths to buy.

This hub

Looking up its measurements.

Check or change its figures

Hub spacing locknut to locknut, 100 front or 110 rear on most BMX mm Same both sides front hubs, or matching flanges

Flange diameter/PCD (pitch circle diameter) spoke hole centre to the opposite hole centre. The drive side is the driver side, left or right hand drive alike, and is usually the bigger flange

Drive side mm Non-drive side mm

Flange position

Flange to locknut Centre to flange

Drive side mm Non-drive side mm

Laced to which rim?

Find your rim

Or type its figures

ERD effective rim diameter, from the spec sheet mm