• Built for the long haul. A 100% chromoly frame and fork with rack and fender mounts, so it carries a load as easily as it handles the commute.
• SRAM Apex 1 gearing. A 42T narrow-wide chainwheel and 11-42T PG-1130 cassette give eleven speeds with enough range for loaded days out.
• Avid BB7 Road disc brakes. Cable discs pulled by SRAM Apex 1 levers, running on disc mount hubs front and rear.
• Tubeless compatible 650b wheels. Double wall aluminium rims on 32-hole sealed bearing hubs with allen skewer axles, wrapped in 27.5" x 1.65" Maxxis Overdrive tyres.
• Cockpit set up for distance. FSA NS Adventure bars with Fairdale cork tape, a forged 6061-T6 aluminium stem, and a Fairdale Race seat on a 27.2mm micro adjust post.

• Size: 27.5" (650b) wheels. Small suits 5'2" to 5'7" (157 to 170 cm) height
• Frame: 100% chromoly, disc, with rack and fender mounts
• Fork: 100% chromoly, one-piece machined steerer tube
• Headset: FSA, sealed integrated, 45º/45º
• Stem: 6061-T6 forged aluminium (S = 60mm)
• Bars: FSA NS Adventure (S = 400mm)
• Grips: Fairdale cork handlebar tape
• Brakes: Avid BB7 Road
• Brake lever: SRAM Apex 1
• Cranks: SRAM Apex 1 (S = 165mm)
• Bottom bracket: Neco BB-501
• Chainring: 42T, narrow-wide
• Chain: KMC X11
• Pedals: Odyssey Twisted PC
• Front hub: Sealed bearings, 32h, aluminium shell, disc brake mount, with allen skewer axle
• Rear hub: Sealed bearings, 32h, aluminium shell, disc brake mount, with allen skewer axle
• Rear cog: SRAM PG-1130 cassette, 11-42T, 11-speed
• Rims: 650b, 32-hole, aluminium, double wall, tubeless compatible
• Tyres: 27.5" x 1.65" Maxxis Overdrive (S)
• Seat: Fairdale Race Seat
• Seat post: Micro adjust, 27.2mm
• Seat clamp: Fairdale, 30mm
• Gearing: SRAM Apex 1, 11-speed, long cage rear derailleur, Fairdale shift cable with Jagwire inline adjuster

Your bike ships mostly assembled in the box. Finishing it takes most people 10 to 20 minutes with basic tools, and the video above walks through every step.

• Fit the handlebars and line them up with the front wheel
• Fit the front wheel, pedals and seat post
• Check the brakes and tyre pressure before the first ride

Tools: Allen key set and a 15mm, 17mm or 19mm spanner for the pedals and axle nuts (bikes can vary between these three sizes). A socket is needed if installing pegs.

Rather have it done? Ask us about extra assembly before you order, or any local bike shop can finish the build for a small fee.