The Federal Jarvis V2 Frame is a blue BMX frame with white graphics and removable brake mounts, shown on its side against a white background.

Close-up of the Federal Jarvis V2 Frame in blue, showing white branding decals on the bottom bracket area and removable brake mounts.

Close-up of the Federal Jarvis V2 Frame in blue, featuring a partial white face graphic on the head tube.

A front view of the Federal Jarvis V2 Frame showcases a clown face illustration on its head tube.

The Federal Jarvis V2 Frame is a black street bike frame with white branding and removable brake mounts, displayed from the side against a plain white background.

Close-up view of the Federal Jarvis V2 Frame in matte black, highlighting the seat tube, top tube, and seat clamp assembly with removable brake mounts.

Close-up of the Federal Jarvis V2 Frame’s black BMX dropout, showcasing clean welds and lines against a white background. Removable brake mounts offer added versatility for this street bike frame.

Description

For his new frame Jarvis wanted to start from the ground up: new geometry, new graphics, new look. He also wanted a no frills frame, so you will notice there is no ICS2 wishbone and no custom IC dropouts, just the classic tubing, the IC seat clamp and a clean look.

The frame still runs removable brake mounts and built in chain tensioners. The bigger change is the geometry, which is more responsive: a 75.5° head tube, a 13.15" slammed chainstay that can be run out to 13.54", an 11.7" bottom bracket height and a 9" standover, in 20.5" or 21" top tube.

Features

No frills, clean look. No ICS2 wishbone and no custom IC dropouts, just classic tubing and the IC seat clamp.
Geometry updated for street. A 75.5° head tube and 11.7" bottom bracket height make this one more responsive than the frame it replaces.
Chainstays from 13.15" to 13.54". Run it slammed for a tighter back end, or let it out when you want more room.
Built in chain tensioners. Set the chain once and the rear wheel stays put, with no separate tensioners to fit.
Removable brake mounts. Keep a rear brake or strip the mounts off for a cleaner frame, with a 9" standover either way.

Specifications

Sizes: 20.5" or 21" top tube
Chainstay: 13.15" slammed, up to 13.54"
Head tube angle: 75.5°
Seat tube angle: 71°
Standover: 9"
Bottom bracket height: 11.7"
Brake mounts: Removable
Seat clamp: Integrated IC seat clamp

Federal Jarvis V2 Frame

Name: Federal Jarvis V2 Frame
Brand: Federal
SKU: FRFE039-BL4-2050
Price: 729.99 AUD
Availability: OutOfStock

Brand: Federal SKU: Click to copy the SKU and show the pick location

$729.99 AUD

Or 4 payments of $182.49 AUD with

Colour - Blue Funk

Top Tube Length - 20.5

Frames are sized by top tube length. Start with your height, then let riding style decide where in the range you land.

Rider height	Top tube
147 to 157cm	19.75 to 20.25"
157 to 168cm	20 to 20.5"
168 to 175cm	20.25 to 20.75"
175 to 183cm	20.5 to 21"
183 to 190cm and up	20.75 to 21.5"

The height bands overlap on purpose. If you land in two of them, riding style breaks the tie: longer for flow, trails and transitions, shorter for technical street and park. Plenty of riders, pros included, deliberately ride longer than a chart suggests.

How to measure

Top tube is measured from the centre of the seat tube to the centre of the head tube, so it is not the length of the tube you can see. Measure your current frame that way and compare.

Size up for stability through trails and transitions.
Size down if you want the bike quick and twitchy for spins and grinds.
Top tube is fixed once you buy, but chainstay length, stem length, fork offset and bar position all change how the built bike feels.

Not sure? Tell us your height and how you ride, and we will tell you what we would put you on.

Read the full buying guide