Inspyre Neo Pro Cruiser Race BMX Bike
Just getting into BMX racing and looking for your first race bike and not too sure about specifications and geometry? No need to stress because French brand Inspyre knows plenty about how to put together a race bike that will stand up to the type of riding that you are no doubt going to dish out as you learn the art of BMX racing.
Not only is the Inspyre a great looking race rig, especially in this blue polish, the frame is full aluminium and forks 100% cromoly fork. In fact this spec of frame and forks represents the best value that we offer at the entry level of race bikes.
The Vee Mk3 tyres will see you carving through the turns with plenty of speed and the double walled aluminium rims will take the cases that no doubt you will be dishing up as you get some sweet air. This bike will take a beating out on the track and ask for more as you get faster and faster.
If you need a entry level cruiser to get out on the track so you can shut the kids up and show them how it's done, then this is your rig! Health insurance isn't included, but our advice is crawl before you walk, walk before you run. But once you've mastered the basics, you won't wipe the smile off your dial.
Key Specs:
TT Length: 21.75"
Wheel: 24"
BB Height: TBC
Crank Length: 175mm
Gearing: 41 x 18
Gear Ratio: 53.49"
Tyre Size: 24x1.75"
Weight: TBC
| Length | 21.75TT |
| Frame | Inspyre Neo Pro - 21.75’’ Aluminium 6061-T6 - 3D forged dropout |
| Fork | Inspyre Neo - Chromoly - Pivot 1-1/8 - Tapered legs |
| Headset | Integrated sealed bearings - IS42 | IS42 |
| Stem | Inspyre Neo - Top Load - Aluminium cold forged - 50mm |
| Handlebar | Hi Ten - 5.5’’ x 27.5’’ - BS: 7° / US: 2° |
| Grips | Inspyre 130mm Krayton |
| Brake | Tektro® BX310AL |
| Crank | 3 pieces aluminium- 4 Hole - 175mm |
| Chainring | Aluminium 4 hole 41T - 104mm |
| Chainring Bolts | Steel |
| Bottom Bracket | Square axle - Ring bearings |
| Pedals | VP CP 9/16 |
| Chain | KMC® Z-6 - 1/2’’ x 3/32’’ |
| Front Hub | Aluminium 36H - 10mm - Balls bearings |
| Rear Hub | Aluminium 36H - 10mm - Balls bearings - Flip/Flop |
| Spokes | Stainless 14G |
| Rear Cog | Freewheel CP 18T - 1/2’’ x 3/32’’ |
| Front / Rear Rim | Inspyre - Aluminium 36H - Double walls |
| Tyres | Vee Tire® MK3 20’’x1.75 |
| Seat / Post | PC Combo 27.2mm |
| Seat Clamp | Aluminium 31,8mm |
| Gearing / Ratio | 41x18 / 53.49" |
| Weight | TBC |
