The Kink Williams Forks are black BMX forks with Nathan Williams' signature design, adjustable offset, and "KINK BMX" plus other white and blue logos on the legs, shown isolated on a white background.

The Kink Williams Forks are chrome BMX bike forks with a straight steerer tube, dropouts, and signature decal on one leg, reflecting Kink’s distinctive style. Shown here against a white background.

Description

Nathan Williams' signature fork from Kink, made from 100% 4130 chromoly steel and post weld heat treated. The point of difference is the adjustable offset: leave the adapters out for a more nimble 20mm offset, or fit them for a more traditional feeling 25mm.

The adapters install with an allen key screw and are completely hidden once the wheel is in. Beyond that, the legs are tapered oval with internal butting, the end caps are investment cast with the K-Brick logo, and the dropouts are 6mm laser cut. Fork height is 316mm with a 165mm steerer tube.

Features

Adjustable offset, two feels. Run the fork without the adapters for a nimble 20mm offset, or insert them for a traditional 25mm, instead of being stuck with one.
Adapters hide once built. Each adapter goes in with an allen key screw and is completely hidden once the wheel is installed, so nothing shows from the outside.
Full 4130 chromoly, heat treated. 100% 4130 chromoly steel with TruTherm post weld heat treatment, which settles the stress out of the welds after the fork is built.
Tapered oval legs, internally butted. The internal butting keeps material where the loads are and trims it where they are not, at 35.6oz including the fork bolt.
6mm laser cut dropouts. Thick laser cut dropouts and investment cast end caps take the abuse at the bottom of the fork, with a 10mm (3/8") slot.

Specifications

Material: 100% 4130 chromoly steel
Butting: Internal butting through the fork legs
Dropouts: 6mm laser cut, 10mm (3/8") slot
Steerer: 165mm steerer tube length
Fork offset: 20mm without adapters, 25mm with adapters fitted
Fork legs: Tapered oval, investment cast end caps with K-Brick logo
Axle size: 10mm (3/8") dropout slot
Weight: 35.6oz including fork bolt
Note: 316mm fork height, integrated bearing race, M24×1.5mm compression bolt thread, 7075-T6 bolt taking a 3/8" ratchet or 6mm allen key, TruTherm post weld heat treated