Onyx BMX ULTRA HG-110/15mm Thru-bolt Rear Hub / Black Ano / 36H

Highlights

HG driver, cog not included
Infinite points of engagement
Silent and low drag
Ceramic hybrid bearings

Description

Onyx Ultra HG hubs a made to the tightest tolerances on the planet. Using sprag internals for strength, extremely low rolling resistance and infinite points of engagement.

Features

HG driver, cog not included. The hardened heat treated stainless driver takes HG (Shimano) compatible cogs, so pick your tooth count and add it separately.
Infinite points of engagement. The patented sprag clutch picks up the instant you push, with no waiting for a pawl to catch.
Silent and low drag. Sprag internals run quiet and roll with extremely low resistance, so more of what you put in reaches the ground.
Ceramic hybrid bearings. Adjustable preload and sideload let you set the feel, and an integrated labyrinth seal keeps grit out of the driver.
Axle not included. The 20mm axle hub converts to 3/8" bolt on, 12mm and 15mm thru axles, but you supply the axle or thru bolt.

Specifications

Fits: 110mm spacing, 15mm thru-bolt
Material: 7075 aluminium hub shell, titanium bolts
Bearings: Ceramic hybrid, adjustable preload
Engagement: Infinite points, silent instant engagement via patented sprag clutch
Driver: Hardened heat treated stainless steel, HG (Shimano) compatible
Cog: Not included
Axle: 20mm, convertible to 3/8" bolt on, 12mm and 15mm thru axles
Weight: 462 grams (16.3oz) without cog
Note: Axle / thru bolt not included. Cog not included. Made in the USA with a 5 year limited warranty.

Spoke calculator

Display

Pick the part it is laced to and we will give you the lengths to buy.

This hub

Looking up its measurements.

Check or change its figures

Hub spacing locknut to locknut, 100 front or 110 rear on most BMX mm Same both sides front hubs, or matching flanges

Flange diameter spoke hole centre to the opposite hole centre. The drive side is the driver side, left or right hand drive alike, and is usually the bigger flange

Drive side mm Non-drive side mm

Flange position

Flange to locknut Centre to flange

Drive side mm Non-drive side mm

Laced to which rim?

Find your rim

Or type its figures

ERD effective rim diameter, from the spec sheet mm