Pride Cayman V2 HD 31.8 Stem / Black / 58mm / 31.8mm Clamp

Description

The Pride Cayman V2 HD 31.8 stem is an improvement on the original oversized stem from Pride Racing with an updated design and optimised stiffness. Thanks to its 48mm wide handlebar support surface, it is much more rigid and secures your bars tighter to prevent them slipping. Further improvements include a lighter weight achieved by hollowing out areas of the stem. Something that can only be attained in a stem entirely machined in one block with a CNC machine. Because it is manufactured from 6061-T6 aluminium is ultra strong and will stand up to thousands of gates, In addition, the bolts are all identical and made of stainless steel.

Combine this oversized stem with a set of Pride Sevenmotion HD 31.8 bars to have the front end of your race rig as stiff as possible.

Features

31.8mm oversized bar clamp. This stem clamps 31.8mm bars, so check your bar diameter first: it is not for standard sized bars.
48mm wide bar contact. The wide handlebar support surface makes it more rigid and holds your bars tighter to stop them slipping.
Four lengths to choose from. Available in 45mm, 50mm, 54mm and 58mm, so you can dial in your reach without changing bars.
CNC machined from one block. Machined in a single piece of 6061-T6 aluminium and hollowed out in places, which is where the weight saving comes from.
Fits 28.6mm steerer tubes. The fork clamp is 28.6mm and every bolt is the same M8 stainless steel item, so setup is simple.

Specifications

Width: 48mm handlebar contact surface
Rise: 28mm handlebar rise
Clamp diameter: 31.8mm stem clamp, 28.6mm fork clamp
Reach: 45mm, 50mm, 54mm or 58mm
Stack height: 34mm stem height
Material: Aluminium 6061-T6, 100% CNC machined
Included: M8 stainless steel bolts, DIN 912 standard
Weight: 320g (54mm stem)
Note: Designed to pair with Pride Sevenmotion HD 31.8 bars. Bars must be 31.8mm.