• Full chromoly Icarus frame. Reinforced 4130 tubing with beefed-up dropouts, integrated chain tensioners, rotor mounts and oval tapered stays for maximum clearance.
• Rock Shox Pike DJ fork. Solo Air with 100mm travel up front, built to take the heaviest hits at the dirt jumps and in the street.
• Convertible Radio Sonar rear hub. The Hybrid system switches between freecoaster and cassette, so you can change how the bike rides without a new wheel.
• Signature Niklas Tilk cockpit. Developed with the MTB street pioneer: an Arise Streetbrawler bar at 76mm rise and 780mm wide on a 32mm reach Arise stem.
• Disc brakes front and rear. Tektro Aries mechanical at the front and SRAM hydraulic at the rear, both 160mm, on sealed Radio PRO-DJ disc hubs.

• Size: 26" wheels, 22.8" top tube
• Frame: Radio Icarus, full 4130 chromoly reinforced tubing, tapered head tube, beefed-up dropouts with integrated chain tensioners and rotor mounts, oval tapered stays
• Top tube: 22.8"
• Chainstay: 14.8"
• Head tube angle: 71.5°
• Seat tube angle: 72.5°
• Standover: 10.5"
• Bottom bracket height: 4mm rise
• Fork: Rock Shox Pike DJ, Solo Air, 100mm travel
• Headset: FSA NO.42/ACB-A integrated A-headset, 1-1/8" to 1.5"
• Stem: Arise Portal frontload, aluminium, 32mm reach, 31.8mm clamping
• Bars: Arise Streetbrawler, 6061-T6 aluminium, 76mm rise, 780mm width, 31.8mm clamping, 9° backsweep, 4° upsweep
• Grips: Radio Frequency XL, flangeless, 160mm
• Brakes: Tektro Aries mechanical disc, 160mm rotor, front; SRAM DB-LVL-A1 hydraulic disc, 160mm rotor, rear
• Brake lever: Tektro RS-360A front, SRAM DB-LVL-A1 rear
• Cranks: Salt+ Ultra square profile 3-piece TSS, chromoly, 165mm, 8 spline
• Bottom bracket: Radio MID set, press fit, sealed bearing
• Sprocket: Radio Vision, aluminium, 25t
• Chain: Salt AM, WZ1 type
• Pedals: Radio Slim, nylon fibreglass
• Front hub: Radio PRO-DJ disc, aluminium, sealed, 15mm aluminium through axle, 32h
• Rear hub: Radio Sonar disc, Hybrid system convertible between freecoaster and cassette, aluminium, sealed, 135 x 10mm female, 32h
• Rear cog: 9t driver, chromoly, sealed bearing, hybrid system
• Rims: Arise DB37, double wall, front and rear
• Seat: Radio DJ combo, medium padded
• Seat clamp: Radio Slim

Your bike ships mostly assembled in the box. Finishing it takes most people 10 to 20 minutes with basic tools, and the video above walks through every step.

• Fit the handlebars and line them up with the front wheel
• Fit the front wheel, pedals and seat post
• Check the brakes and tyre pressure before the first ride

Tools: Allen key set and a 15mm, 17mm or 19mm spanner for the pedals and axle nuts (bikes can vary between these three sizes). A socket is needed if installing pegs.

Rather have it done? Ask us about extra assembly before you order, or any local bike shop can finish the build for a small fee.